Cherokee SRT8 Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
410 Posts
Discussion Starter #1
My dust cover has a cut in it. Can the dust cover be replaced and if not can you change the ball joints out. The stealership said i had to buy complete A arm.
 

·
That guy..
Joined
·
1,281 Posts
Im 99% sure they are one unit, not replacable..
 

·
Registered
Joined
·
410 Posts
Discussion Starter #4
Thx for info guys im lowered so wonder if i should order new stock arm or the set made to adjust for lowering springs?
 

·
Registered
Joined
·
144 Posts
chippy the stocks bj's are replacable, there pressed in. you can also just replace the boot if you can find one, the ring at the top of the boot is agravating but will come off, then just slide the boot off. i bj is replaced removal of whole a-arm is necesary. i have taken my boot off to put more grease in the boot.
 

·
Registered
Joined
·
410 Posts
Discussion Starter #6
Thx man. The joint is fine I found the cut boot in a short amount of time. Il try and find a cover
 
1 - 6 of 6 Posts
Top