Cherokee SRT8 Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
487 Posts
Discussion Starter · #1 ·
I'm removing all my trim for the vinyl wrap, and do not exactly know how each piece removes. Below is a picture of a jeep, starting from the window trim far left is Trim 1, middle is Trim 2, and far right is Trim 3. Also need to know how to remove the front trim on the bumper as well as the rear trim that covers the parking sensor. Lastly how each of the door moldings are removed, rear and front door trim. Any help would be awesome!

-Jerod

 

·
Registered
Joined
·
1,203 Posts

·
Registered
Joined
·
487 Posts
Discussion Starter · #3 ·
Thanks for that website! But I'm talking about the outside trim/door moldings that are on the door as well as right below the window...the chrome pieces.

-Jerod
 

·
Registered
Joined
·
1,203 Posts

·
Registered
Joined
·
1,613 Posts
Piece at the front has doubled sided tape along the leading edge and tongue and groove type tabs at the back. You'll need to heat up the tape and then carefully pry the strip off. As for the piece at the rear, you'll need to remove the bumper as that one is basically locked in place.
 
1 - 7 of 7 Posts
Top