Cherokee SRT8 Forum banner

New HHP 6.1L Stroker Short Blocks

2492 Views 1 Reply 2 Participants Last post by  junior666
We are proud announce our two new lines of stroker short blocks in addition to our Professional Series:

1)Our Street Series HEMI short blocks are designed for the customer who wants to cruise with a lot of power.

This custom 6.1L based Stroker built exclusively for HHP by Tony Bischoff and BES Racing Engines (Winner of the 2006, 2007 and with a Gen 3 HEMI, the 2010 Engine Masters Challenge!) is a great option for customers looking for a premium engine built by the best engine shop in the country. Available for all NA and supercharged, turbocharged or Nitrous injected vehicles, these motors are designed to easily handle over 800 horsepower without upgrades. Combine it with our HHP/BES Ported & Polished Heads and one of our custom HHP/BES Stroker camshafts and you're on your way to having a fully streetable car you can both kill the competition with and confidently drive across the country and back with no issues. As with all of our motor packages, with HHP you are not just receiving an awesome engine package, but you are getting our expert tech support which runs 16 hours a day, most days. We are here to make sure you are another great HHP success story. Your satisfaction depends on it.

Fully machined and assembled by the engine experts at BES, this Street Series stroker comes with the following Rotator package:
K-1 Forged 4340 4.080" Crankshaft
K-1 H-Beam 6.125" rods w/ARP 2000 Rod Bolts
Clevite main/rod bearings
Forged 4.070" Wiseco Pistons
Gas Nitrided GFX Rings
Zylan skirt coatings
*ATI Damper not included but recommended with your shortblock purchase.

392 Street Series Starting at $4345.00 exg.
426 Street Series Starting at $4395.00 exg.

2)Our Sport Series HEMI short blocks are designed for the average street and strip customer.
Fully machined and assembled by the engine experts at BES, this Sport Series stroker comes with the following Rotator package:
Manley 4340 Forged Crankshaft
Manley Rods w/ ARP Rod Bolts
Manley 2618 Alloy Forged Pistons w/ Total Seal Rings
Clevite Bearings.
*ATI Damper not included but recommended with your shortblock purchase.

HHP 426 Sport Series Starting at $4,795.00

3)Our high end Professional Series HEMI short blocks are the most popular choice for our SRT-8 owners who want the best engine, whether for the track or for daily street use.

Fully machined and assembled by the engine experts at BES, this Professional Series stroker comes with the following Rotator package:
Callies Forged 4.050 Crankshaft
Compstar Rods
Custom Bischoff Design Ross Pistons and Rings
ACL Bearings.
*ATI Damper not included but recommended with your shortblock purchase.

426 Stroker Starting at $5,295.00

All of our engines are:

Balanced & Blue Printed: All blocks are sonic tested for integrity and thickness. All engines are professionally balanced and blue printed. Blue Prints available to customers upon request at time of purchase.

Compression Ratio: Due to slight variances between rotator/piston combinations, our listings are generalized for display purposes. Exact compression ratio's will be discussed and recommendations made by your technical sales representative assigned to you by HHP or by Tony Bischoff of BES.

Optional Upgrades: Recommended for High Compression strokers, Low Compression strokers built for 20+ psi boost, Low Compression nitrous injected strokers seeing over 15psi boost, and Nitrous Engines with intentions of using over a 350 shot, combined total.

For More Information: Please Call Us at 888-894-1115 for more info regarding this engine and what you will need to successfully complete the transformation of your vehicle into one of the baddest vehicles the HEMI world has ever seen. Let our experts help you plan out your build. At HHP, we carry EVERY part you will need to complete your entire stroker build, and since we are a chain of installation shops as well, we can provide everything from inhouse installation and tuning to tech support and email tuning for the do-it-yourself mechanics.

Warranty: 3 Year/36,000 Mile Limited Warranty applies to all HHP/BES engine products. BES stands behind their work and after years of working with the number one engine shop in the country, we can vouch for their work as we have never had a motor come back due to an assembly error. NONE of our competitors can say this. All part manufacturers limited warranties apply as well. We recommend you check out our track record and you will not find one unhappy HHP/BES stroker customer. What we don't warranty is damage caused my installation mistakes by unauthorized installers, damage caused by non-HHP tuners, damage caused by use of inferior or non-recommended parts, damage caused by idiotic abuse or neglect, damage caused by stupidity, and on the same level, damage caused by listening to the advice of your friends. Race built motors are just that and our 1000+ hp customers understand that any motor producing high hp will need freshening over time to keep it performing at it's maximum potential.

Special Offer: As a courtesy, HHP will provide all stroker customers who purchase our engines with camshaft and the required injectors a baseline startup tune to get you started. We also provide a discounted email tuning package by our professional tuners as well.

Jeep forum Special:

392 Stroker Starting at $4295.00

426 Stroker Starting at $4295.00

Now available from BES/HHP 6.1L aluminum blocks. Contact us for info. on turning one of these aluminum blocks into a fire breathing HHP/BES Forged Short Block.
See less See more
1 - 2 of 2 Posts
Don't forget your forged 6.1 Jeff, I know it can take a beating.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.