[alex6 srt-8]

I install the eibach springs and the arms are hitting the metal any body have a solution for this problem.

 

[AROD]

can you elaborate more on where exactly it is hitting. is it always in contact or only when you hit a bump ?

pics would be ideal. sounds like improper installation to me

 

[alex6 srt-8]

can you elaborate more on where exactly it is hitting. is it always in contact or only when you hit a bump ?

pics would be ideal. sounds like improper installation to me

Is hitting when a get a hole or bump if any one have some pics so a can see the installation will be perfect

 

[Rose City GC SRT8]

Sounds like your control arms are making contact with the shock tower. This is why the bumpstop is there. How much did you trim the bumpstop? I think you need to put a stock bumpstop back on.

 

[alex6 srt-8]

Sounds like your control arms are making contact with the shock tower. This is why the bumpstop is there. How much did you trim the bumpstop? I think you need to put a stock bumpstop back on.[/Q

I cut 1" the bumpstop and i check the gap between the bumpstop and the shock with the jeep in the floor is about 3/4".I am getting crazy:flame:

Please any solution

 

[Rose City GC SRT8]

Go back to the stock bumpstop. 1" is way too much to cut off. I cannot tell you how much is tolerable. Maybe start with 1/2" or less? It's yours to experiment with.