Cherokee SRT8 Forum banner
1 - 19 of 19 Posts

·
Premium Whore (Lifetime)
Joined
·
3,065 Posts
Discussion Starter · #1 ·
Hey guys, I'm installing a set of Fore fuel rails on my Jeep with the 80 lb Ford injectors. The shop just called asking about spacers for the fuel rails, apparently the 80 lb injectors are 1/4" taller that the stock ones. Anyone run into this before? Are there spacers available, or am I going to have to MacGyver something to work?
 

·
Straight Up Beast SON!!!
Joined
·
17,142 Posts
Hey guys, I'm installing a set of Fore fuel rails on my Jeep with the 80 lb Ford injectors. The shop just called asking about spacers for the fuel rails, apparently the 80 lb injectors are 1/4" taller that the stock ones. Anyone run into this before? Are there spacers available, or am I going to have to MacGyver something to work?
PM Harrison bro....I talked to him about this already.... They are suppose to be 10mm spacers...
 

·
Premium Member
Joined
·
1,405 Posts
Keep us updated on the install..Make a few dyno pull videos.
 

·
Registered
Joined
·
802 Posts
Ooo excitement!
 

·
Premium Member
Joined
·
985 Posts
Any good hardware store should have cromed spacers.
Exactly Ace Harware is a good example. Honestly I would never have dreamed to call my customer about some silly spacers. I would have handeled it and moved on.

Just my 0.2 Good luck with the build sounds killer
 

·
Premium Whore (Lifetime)
Joined
·
3,065 Posts
Discussion Starter · #15 ·
Exactly Ace Harware is a good example. Honestly I would never have dreamed to call my customer about some silly spacers. I would have handeled it and moved on.

Just my 0.2 Good luck with the build sounds killer
The shop is in the woods of Central Mass, I am closer to them than any Lowes, Home Cheapo, or any hardware store that would have something like that. I also had to make another trip out there to drop off a bushing......so them asking me if I had spacers really isn't a big deal.

And why are you bugging me with your .02??......I still don't have my underhood kit.:D
GET CRACKIN'!!!!!!!!!!!! I got serious bling going on over here, and I NEED my blue BT pieces. J/K :rofl:

Here are a few pics of the progress they have made since the blower arrived yesterday:



 

·
Straight Up Beast SON!!!
Joined
·
17,142 Posts
Phil,

Since you just added spacers to install your 80# injectors then I would think you would need long bolts to install your Fuel Rails then. Correct? Unless the existing Fuel rails bolts are long enough to go thru the spacer and still be able to grab a few threads to secure the fuel rails to the intake manifold.
 

·
Premium Whore (Lifetime)
Joined
·
3,065 Posts
Discussion Starter · #18 ·
Phil,

Since you just added spacers to install your 80# injectors then I would think you would need long bolts to install your Fuel Rails then. Correct? Unless the existing Fuel rails bolts are long enough to go thru the spacer and still be able to grab a few threads to secure the fuel rails to the intake manifold.

I'm not sure, but they figured it out before I got back to them.
 
1 - 19 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top