Cherokee SRT8 Forum banner
1 - 7 of 7 Posts

·
Registered
Joined
·
2,792 Posts
Discussion Starter · #1 ·
I bought these because they were cheaper than going the 20" route and saved some weight as well. These are 63lbs inflated I believe. Around 50 passes on them and they stick like glue. No actual burnouts on them as I'm still AWD. I drove about 400 miles on these to and from the track and around town.
Still lots of good tread on them. New ones have 6/32" of tread and these have 2-2.5/32" to the wear bars and 3.5-4/32" to the tread bottom. Wheels in perfect shape with no rash or bends. These stand 28.9" tall on Nitto's site. The 315/35/20 everyone uses is 28.74" tall. These worked great with my 275/40/20 Toyo STII's on the front. I paid $540 for the tires and $340 for the wheels.They are Vision legend 5...18x9.5 +35mm offset. Only selling to go with 20" drag radials all the way around. These will not fit the front.$550+ shipping.







 

·
Registered
Joined
·
2,792 Posts
Discussion Starter · #3 ·
Gonna bump these,$500. Brian (bcm0018) used these at VMP last month and they did the trick for him! Any MIR guys looking for some last minute traction??
 

·
Registered
Joined
·
914 Posts
I just bought some used OEM 20"x10" rears to put together a drag radial set up. If I can find a buyer for those rims, I will take this set up off your hands. Or maybe you might be interested in the 20"X10" rims I have if you are putting together a dedicated drag radial set up.
 

·
Registered
Joined
·
2,792 Posts
Discussion Starter · #7 ·
Bump,I can't use these anymore since I just sold my stock wheels with 275/40's for the front. So these will be sitting until someone takes them off my hands.
 
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top