Search Results for ‘how to’

I had the BC Racing Coil Overs (BR-Type) and Jeeping by Al Upper Control Arms (JBA-UCA) installed on my silver 2009 Jeep SRT8 about two weeks ago. I figured I should give them a review for other people on the fence and provide some tips & tricks (how to) for new owners trying to get them dialed...

These are D1S 8000k bulbs from Steve at XenonDepot. Time: 30minutes Tools: Flat Head screw driver Ratchet with 8mm socket Thumb drive ratchet Gloves Difficulty: Easy Driver Side: Since I don't have the stock intake my process is slightly different. If you have the stock intake, and you...

i have a 2007 without the rear heated seat i was wondering if anyone has added the heated seats to theirs if so how and what all was needed to complete the process. thanks

This is the installation of the Borla ATAK exhaust. Time: 1-2 hours Tools: Floor Jack Jack Stands Creeper (Or a lift and not the above) White Lithium Spray Grease Torque Wrench with Deep 15mm Socket Ratchet Wrench Pry Bar Exhaust Cutting Tool Flash Light Maybe a buddy (did mine by myself)...

This will apply to any brand brake pads you guys change to, following the directions exactly should eliminate all or majority of your noise. Okay found a fix for the rear brake squeel. I think the biggest problem is that copper looking paste they provide from Brembo is junk its way to sticky...