BT Catch Can on a 2013

[A.V.GCSRT8]

Hey parry did you use or get any spacers? Looks to me you need to put some spacers between the head and the bracket then run a longer bolt thru. That should move the can out more

[ParryErmo]

Originally Posted by A.V.GCSRT8

Hey parry did you use or get any spacers? Looks to me you need to put some spacers between the head and the bracket then run a longer bolt thru. That should move the can out more

Yea I did. The bolt supplied is relatively small. Still used the spacer and washer when I installed the bracket

[A.V.GCSRT8]

Originally Posted by parry69

Yea I did. The bolt supplied is relatively small. Still used the spacer and washer when I installed the bracket

from the looks of it you will have to do what I did, used both the spacers form BT and added some washers also with a longer bolt

[ParryErmo]

What size bolt and how many washers did you use?

[A.V.GCSRT8]

Originally Posted by parry69

What size bolt and how many washers did you use?

It took 12 washers lol I think the bolt was 4" long if I remember right. I just took the original bolt to get the threads right and also the spacers to look for the right length. You can actually go a little longer by accident as the threads go all the way thru and dont end

[Bono392]

Not sure how the BT one mounts, but I used a thread extension to clear the extended covers when mounting my Moroso catchcan...

[ParryErmo]

Originally Posted by Bono392

Not sure how the BT one mounts, but I used a thread extension to clear the extended covers when mounting my Moroso catchcan...

Attachment 27001Attachment 27002

Definitely the best solution I've heard so far. Hopefully my local hardware store has it.

Do you think 2 inches is enough? How big is yours? (that's what she said)

[Bono392]

Yep - 2" would be perfect - Mine's just under ( 'Credit card' shown for comparo). Is different mounting point to yours, but the clearance change is the same (if you know what I mean). As my mount is up front & centre, I just used a chromed allen bolt to look pretty, and spent plenty of time giving the shaft a vigorous polish (She DID say that.. )



Good luck! Oh - Looks like I didn't rotate the pix sorry.. but you get the idea

[Grunter]

Originally Posted by Bono392

Yep - 2" would be perfect - Mine's just under ( 'Credit card' shown for comparo). Is different mounting point to yours, but the clearance change is the same (if you know what I mean). As my mount is up front & centre, I just used a chromed allen bolt to look pretty, and spent plenty of time giving the shaft a vigorous polish (She DID say that.. )

Great result Deano!

Any problem if I send my Jeep down to you, to deck out with all the goodies that you've got on yours? Would save me a bit of work.

Might give the vigorous polish a bit of a miss though.


PS: First post after joining 5 years ago. Is that a record.

[Bono392]

May I say I'm honoured to be part of that record-breaker