Arrington 426 Short Block 4 SALE

[sarge]

SOLD........SOLD.......SOLD..........SOLD


Arrington K1 426 short block..........***For Sale***
Bore is 4.080/stroke 4.080
Compression is 10.3-1 with a 72.4cc chamber head
4340 Steel Crankshaft with Clevite Main and Rod Bearings
Arrington molly filled piston rings
K-1 H Beam Bushed Connecting Rods w/ARP2000 Rod Bolts
Wrist Pins and Locks
ARP Main Studs
Pro-Gram Billet Main Caps*****
Stock Shot Peened Main Bearing Caps
Dura Bond Cam Bearings
High RPM Oil System
Remove all flashing, chamfer all 90deg corners
Radius bottom of all cylinder bores
.0625" chamfer radius throughout oil system
MicroPolish bearing surfaces(including wrist pins)
Micrometer measurements of all bearing surfaces; hand match individual bearings to journals maintaining .0001" tolerance.
Sonic checked cylinder bores
Hand Chase Threads
Hand Clearance for Stroker Assembly

This engine is a NASCAR quality/grade machined, assembled and finished by Arrington Engines.

Arrington warrantied my previous 426 and is replacing it......I dont need two (2) of them.

ASKING $5,500.00 and your old core exchange




.

[BuilderBill]

Originally Posted by sarge

Arrington K1 426 short block For Sale
Bore is 4.080/stroke 4.080
Compression is 10.3-1 with a 72.4cc chamber head
4340 Steel Crankshaft with Clevite Main and Rod Bearings
Arrington molly filled piston rings
K-1 H Beam Bushed Connecting Rods w/ARP2000 Rod Bolts
Wrist Pins and Locks
ARP Main Studs
Pro-Gram Billet Main Caps
Stock Shot Peened Main Bearing Caps
Dura Bond Cam Bearings
High RPM Oil System
Remove all flashing, chamfer all 90deg corners
Radius bottom of all cylinder bores
.0625" chamfer radius throughout oil system
MicroPolish bearing surfaces(including wrist pins)
Micrometer measurements of all bearing surfaces; hand match individual bearings to journals maintaining .0001" tolerance.
Sonic checked cylinder bores
Hand Chase Threads
Hand Clearance for Stroker Assembly

This engine is a NASCAR grade machined, assembled and finished by Arrington Engines.

Arrington warrantied my previous 426 and is replacing it......I dont need two (2) of them.

ASKING $5,500.00 and your old core exchange




.

Sarge....that is a hell of a deal!
Bill

[Vinnysrt8]

wow that is a deal how many miles r on it.

[RedRockerSRT]

yeah......how many miles are on it?

[sarge]

Originally Posted by RedRockerSRT

yeah......how many miles are on it?

The engine is my previous 426 which was a NASCAR style built engine. This engine had 10,000 miles before I removed it for the warranty work. Arrington has completely gone through it and installed all new pistons, bearings and basically returned it to a new engine.

Basically its a new engine.




.

[Vinnysrt8]

wow it says short block so it doesnt come with heads or does it.

[sarge]

Originally Posted by Vinnysrt8

wow it says short block so it doesnt come with heads or does it.

No heads.....the engine "shortblock" is identical to this photo from Arrington.....

[Vinnysrt8]

ok that what i thought it is a good price.

[sarge]

Originally Posted by Vinnysrt8

ok that what i thought it is a good price.

I'm sure if I get a sale on this engine, I can wrangle a set of heads at cost from Mondello.

[sarge]

BUMP for a good deal.