Cherokee SRT8 Forum banner

OFFICIAL 1/8th Time List ET/MPH

39K views 75 replies 34 participants last post by  Hemityme 
#1 · (Edited)
We are trying to put together a new time list. 1/8th mile times only. So just like the 1/4mile list, tell us your mods, time, mph, 60', and the 330' would be cool. List them like this:

1) Cobrakid: 1.60 60ft 4.66 330, 7.28@94.03
A,D,J,L,M,R(170),U,W,X,Z,AA

2) SilveRT8: 1.691 60'/ 7.751 1/8th. Mods: B,D,I,J,L,M,T,W,Z.
Other: Napierville, Canada, 10/28/07, 41-44F, -1032' DA

3) GoldenGreek: 1.709 60', 5.011 330', 7.824 1/8th 87.19mph
Mods: c,d,e,f,g,i,j,k,l,m,z
October 28th--10:53 am New England Dragway- Epping, New Hampshire
51-55 degrees out

4)BOOST ALMIGHTY: 1.71 60', 5.07 330' 7.93 1/8th 87mph Mods: B,D,J,L,M,T,W,X,Z,AA,BB
11/15/07, 45* 400' DA

5) 12SECUV: Music City Dragway, Goodlettesville, TN - 10/19/2007 - Approx. 65 Degrees
1.7571 60', 5.1800 330', 8.0749 1/8th @ 85.08MPH
Mods:B,D,E,F,I,J,K,L,M,T

6) LBCSRT8: 1.78 60', 5.23 330', 8.14 1/8th, 84.23mph mods: A,D,J,L,M,T
Irwindale, CA 60*

7) Jayzstang: 1.79 60', 5.29 330', 8.29 1/8th 81.93mph Mods: X
50* New England Dragway 10/26/07

8) qluber: 60' 1.837, 330' 5.341, 1/8 8.290, MPH 83.25
Mod= b,h,j,l,t,w,bb DA +875

9) Black SRT: 1.81 60' - 5.35 330' - 8.33 82.3 mph mods:A, J
70 degrees at no problem raceway donaldson ville la.

Performance Modification Key

A) Filter/Snorkel Mod
B) Filter/CAI/Snorkel Mod
C) Ported Intake Manifold
D) Phenolic Spacers
E) Ported Cylinder Heads
F) Aftermarket Camshaft
G) Longtube Headers/Stock Catback
H) Stock Exhaust Manifolds/Aftermarket Catback
I) Full Aftermarket (Header to Tailpipe) Exhaust
J) PCM Modification (B&G/Diablo, etc)
K) Aftermarket Wheels/Tires
L) Aftermarket Thermostat
M) Fan Mod
N) Built Stock Displacement Shortblock
O) Stroker (Specify Displacment)
P) Supercharger (Specify Brand/Size)
Q) Turbocharger(s) (Specify Brand/Size)
R) Nitrous (Specify Shot)
S) Dual Power Adder (Specify)
T) Pump Gas
U) Race Gas
V) Aftermarket Stall Converter
W) Brake Duct Mod
X) ABS Fuse Pulled
Y) Ediff Fuse Pulled
Z) Upgraded Spark Plugs
AA) OEM Resonator Delete
BB) Iced Intake
 
See less See more
#2 ·
Boost, could you possibly break it down into a couple of 3 different categories or groups? Maybe put stock exhaust guys together, Header guys grouped and then Heads and Cam and Power adder guys. Since these are the major mod categories, it kinda makes things easier to sort through......Just a thought...
Thanks
 
#5 ·
Mods: c,d,e,f,g,i,j,k,l,m,z

60 ft.--1.709
330'--5.011
1/8--7.824
mph--87.19

October 28th--10:53 am New England Dragway- Epping, New Hampshire
51-55 degrees out
 
#8 · (Edited)
WOW Ari! Nice times. Do you want to know what this would be in the 1/4 mile? 2 weeks ago when I ran 12.307, my 1/8 time was 7.827
Your Corrected time would have been 12.39 as per Auto lookup DA on Smokemup site
Congrats
Claude
 
#11 ·
Finally! An 1/8 mile time slip tracker!
mods: A,D,J,L,M,T

60' 1.78
330' 5.23
1/8 8.14
mph 84.23

"Irwindale Raceway" Irwindale, California aprox. 68 degrees out
 
#14 ·
Boost, .can I Post Mine In The Spring. I Live In Maryland And Maryland International Closes On The 23rd. I Won't Get My Truck Back Until After Words. I Am Getting The Hhp Stage Ii Done Along With Kooks Longs Thru Cats. We Are Going To Try This Set Up First. If All Goes Well We Will Put The Arizona Supercharge Set Up On Top. First Setup Should Have Me At 600hp Flywheel And Second Stage Of Setup Should Have Me Over 700hp Flywheel. We Will Have To Tinker With The Rear In Order To Try To Max Power At The Tires. Why does everyword I type convert the first letter to caps when i submit?!
 
#18 ·
Congrats Boost! I never went this fast without headers. Checking my timeslips I got a 7.93 on a 12.45 pass. Are you thinking of adding headers? they dropped my ET by .21 in the 1/4 mile
Claude
 
#21 ·
60' 1.837
330' 5.341
1/8 8.290
MPH 83.25
Mod= b,h,j,l,t,w,bb DA +875
 
#30 ·
1.79 60 foot
8.210
83.96 MPH

K&N intake, 180 t-stat, DCX Depot Tune
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top