Bottoming out?

[SRT8-DOUGLAS JR]

Just a thought, check your rear bump stops mine rode fine until any significant bump in the road then it would bottom out my rear bump stops were shot

[PITTZ]

Yours probably look like this. You can get new ones online and pop them in.


Sent from my iPhone using AutoGuide.com Free App

[Cfm56doc]

Originally Posted by SRT8-DOUGLAS JR

Just a thought, check your rear bump stops mine rode fine until any significant bump in the road then it would bottom out my rear bump stops were shot

Finally a nice day so I did some cleaning and brake maintenance. While the wheels were off I checked the stops and fronts were fine. The rears (both) on the other hand are completely shot with just reminants left of what was once a bump stop.

Do any of our vendors sell the stops and is there a write up on chaging them? BTW stock springs and shocks.

Thx for the suggestions.

[SRT8-DOUGLAS JR]

I'm can't remember where I purchased from there is a thread some where, if you search you'll see it. As for installation pull what's left out and push the new ones in actually not that bad. I did take off the wheels so I could get in there easily.

[Cfm56doc]

Here is what was left of the bump stop after 35k miles.

[BlackSRT808]

Originally Posted by Cfm56doc

Here is what was left of the bump stop after 35k miles.

Where can I get these rear bumps stops? mine are definitely shot also


Sent from AutoGuide.com Free App

[Cfm56doc]

Originally Posted by BlackSRT808

Where can I get these rear bumps stops? mine are definitely shot also


Sent from AutoGuide.com Free App

I think I got mine from mopar parts online and they were about $20 each.