TB install Monday, Do I need to be worried

[bxcharger]

Anything I need to be aware of when I do this Monday other than clean out the intake and reassemble with same O-ring.

[ekaz]

Nope, pretty straight forward.

[bxcharger]

I figured as much, thanks man.

[nyjoed]

U taking the manifold off?? If so do not over tighten the screws that hold the mani to the heads. 10lbs max!!


Sent from my iPhone using AutoGuide.com App

[camuman]

Are you boring out im to match tb?

[bxcharger]

Nope, not now...deal on the 85mm TB was too good to pass on. I'm going to clean out manifold with long screw driver some rags and zip ties, a member on the forum did it this way and it seemed to get most of the excess oil. When I bought truck 2 months ago it never had a catchcan.

[tugboatchad]

What 85 mm TB did you buy? I thought our stock TB were 80 mm but Meeper corrected me and said 85 mm. I went in the garage where I had a stock one sitting on the bench, low and behold my calipers said it was 84.5 mm.




Sent from my iPhone using AutoGuide.com App

[bxcharger]

It's just a CnC'ed and ported one.

[DCsnow1000]

GL with the install

[Speedlogix-Sales]

Originally Posted by bxcharger

Anything I need to be aware of when I do this Monday other than clean out the intake and reassemble with same O-ring.

How did your install go? Are you seeing a performance difference?