What real world gains can I expect

[IdahoSRT8]

I just got my Christmas present today, a custom grind cam from A.J. to compliment my blower. Specs are as listed:
Gross valve lift
.566 intake
.566 exhaust
Duration at tappet lift
264 intake
270 exhaust
Duration
214 intake
218 exhaust
Separation 114.0

What kind of increase in power, and estimates on et improvements can I expect. I do not have access to a awd dyno, so I really dont have a baseline to compare to. Does anyone have similar mods (Maggie, Kooks, high flow cats, Borla, MTCM) to compare?

Thanks in advance, cant wait to hear how she sounds!

[IdahoSRT8]

Nothin? Maybe I should move this thread to the dumb performance question thread...

[SRTravis]

cams and heads together is where you see a difference, you probably will see some gains, Im not familiar with the specs on the stock cam but im sure you will see a gain. To get the best noticeable gain from a cam have to pair it with a set of heads. flow bench test your heads and see how much cfm (air flow) your specific heads get at difference lifts, then you base your cam specs from that data. hope that helps!

[cmn1]

Maybe you should have asked the guy that made your cam and tunes these things. You may be right in putting it in the dumb thread.

[ChiefP]

You don't have to have an all wheel dyno. Very easy to use a 2-wheel. You don't even need to drop the shaft, but my tuner did.