DIY: A/C & Heater Actuator Gear

[kennzz05]

is there a calibration procedure for the climate control systems? ive read there is one for the non climate ones but havent found anything for the auto systems

[cmn1]

Originally Posted by kennzz05

is there a calibration procedure for the climate control systems? ive read there is one for the non climate ones but havent found anything for the auto systems

You need to adjust the gear which is why you have to keep pushing the recirc button to get the teeth lined up right. The way you have it set it probably isn't going fully one direction

[kennzz05]

ok well let me ask this, should i expect to hear an audible clunk or anything when the door closes? because i dont now. but being that the recirc never worked since ive had it i dont know what to expect

[cmn1]

Originally Posted by kennzz05

ok well let me ask this, should i expect to hear an audible clunk or anything when the door closes? because i dont now. but being that the recirc never worked since ive had it i dont know what to expect

I would manually open and close the door. You should be able to feel when it hits. I don't have nor did have this problem but it sounds like you aren't aligned properly.

[kennzz05]

thanks and merry christmas

[mklaus]

Great write up, Wade helped me out awhile ago with this problem... I thought he had a write up on here as well, Merry Christmas everyone

[camuman]

You are my hero.

[SRT8Girl12]

Haha, thanks! Hope this helps!

[camuman]

Oh hell yeah it helped. Did it today. Worked like a charm. Again you are my hero.

[SRT8Girl12]

Awesome to hear! Thanks again