New LED Interior Lights

[Sina]

Hey guys,
I just changed out my interior light to LED, I did all the doom light in while and the foot part red, the glove box red, and the trunk red. Here are some pictures of it during the day, I'll post some night ones up once it gets dark. Let me know what you guys think.


Glove box


Trunk


Rear Doom


The foot part lol


Front Doom

[uhoh]

nice!! im looking to do the same thing! do you have bulb numbers for trunk, glove box, front & rear dome!! looks great! thanks!

[Sina]

These are the links that i got mine from, they are awesome and super bright.

- This is for the rear doom
http://store.ijdmtoy.com/8-SMD-Wide-..._t10_sku18.htm

-This is for the glove box, the foot part, and the trunk, all the same type of bulb.
http://store.ijdmtoy.com/SMD-LED-Doo..._t10_sku11.htm

-And this is for the front doom, they have different sizes and colors if you look on the website.
http://store.ijdmtoy.com/24-LED-Inte...anel_sku95.htm

[Stroudism]

How many bulbs to do both foot wells?

[LVSpeedemon]

Originally Posted by Stroudism

How many bulbs to do both foot wells?

1 bulb per foot well up front. It's a total of 7 bulbs if you don't count thr 2 vanities & glovebox. I did all but those 3 in red LEDs. I'll do the 2 vanities in white & leave thr glove box stock so I don't have the dim glow of the LEDs when they are off.

[Stroudism]

Cool thanks for the info. But it sounds like there are a total of 4 bulbs under the dash (footwells) right? I want to do red too. It looks sweet.

[CHUCKTOWNSRT8]

Originally Posted by Stroudism

Cool thanks for the info. But it sounds like there are a total of 4 bulbs under the dash (footwells) right? I want to do red too. It looks sweet.

There's only two footwell lights.

[HOSTIL]

Hey guys, I ordered these lights for the foot wells and the maps. I got the foot wells and rear maps in no problem. I have a question about the front maps. The bulbs are completely different from the stocks. They are a flat LED panel 1.5" x 1.25" with an adaptor that fits in the bulb socket. How did you mount these panels inside the lens?? I took the outer chrome piece out....leaving the inner one in. Did you just shove everything up in there and let the LED panel float around? Or actually mount it some how? Thanks!

[BWSRT-8]

I purchased the ones from ijmdtoy.com. I'm getting a constant when I put in both map lights, anyone else? It may just be the wrong bulb, b/c the packaging said it was for a Commander. I replaced every light in the cabin except for the vanity lights.

[kennzz05]

Originally Posted by BWSRT-8

I purchased the ones from ijmdtoy.com. I'm getting a constant when I put in both map lights, anyone else? It may just be the wrong bulb, b/c the packaging said it was for a Commander. I replaced every light in the cabin except for the vanity lights.

try putting the standard bulb back in the hatch, dim glowing is a common issue when all bulbs are replaced with leds, one incandesant will usually create enough resistance to make the differance