My 3000th post. How about that. Chris at TTC must have noticed my post count and decided to have some fun. Can't imagine why, but an impressive number of onlookers took interest. For that reason, I'll add some photos to my 3000th post to at least make it entertaining and not a total loss.
As it turns out, I am trying a new thing or two in the engine bay, Sony A55 and others at work...
Casting sig for...
a alum new block, still in the wrapper
block upskirt, nice mains...
Carillo rods
that will connect to Ross pistons
one ring to squeeze them all...
new jeep fuel hat from Fixer Dave Sawin - triple 340s, billet basket set up for a-n fittings -10 out and -6 in.
high tech fuel squirters from ID
Intermission - Tech tip - If anyone was curious about the rocker bones/head straps part numbers - 6.1 vs apache, they really are a little different...
Speaking of heads, here's the port job on some Apache heads now, with Ferrera 8mm whizbang valves to be backcut and angled, springts, retainers, keepers and guides of suitable spec. Sorry no pics yet., well, maybe one or two...
intake port
exhaust port
chamber clean up
The Techco twin screw should really like a new 4.18x bore block and ported apache heads.
Then again, maybe I could change the lungs, while the engine's out and all...
Cool gadget, but what's it for.....
To control all of this...
Twin Turbo Creations 67/66 ball bearing billet ball buster balls out Jeep turbo kit.
Coated image...
Thanks Chris, with all the success Peter is having with his kit, I am looking forward to bolting this together. The local shop may even let me turn a bolt or two on the clamps besides just holding the flashlight.
Gonna need a new intake manifold...
Also had it ported and machined a beer keg intake to accept a 90mm...
and smoothed the runners and bosses so the air will flow....
Can't have cold turbos..., Chris, the coating done yet?
and I guess I'll need a new badge...
Probably need a Techco for sale thread, too.
So there's the grocery list. Been quietly accumulating for months, which has in itself been lots of fun, especially with a number of different folks competitively running low numbers with turbo kits this summer. Now am running out of things that we don't have. Once heads are completed and delivered, a turbo cam of suitable spec will be designed locally in collaboration with Cammotion. Not going in the shop just yet, first will be heading up the highway a bit to Jason Wood of Wizard Racing for some safety. Maybe its all done in time to make FL in January 2013. Or 2015 at this rate.......
As it turns out, I am trying a new thing or two in the engine bay, Sony A55 and others at work...
Casting sig for...
a alum new block, still in the wrapper
block upskirt, nice mains...
Carillo rods
that will connect to Ross pistons
one ring to squeeze them all...
new jeep fuel hat from Fixer Dave Sawin - triple 340s, billet basket set up for a-n fittings -10 out and -6 in.
high tech fuel squirters from ID
Intermission - Tech tip - If anyone was curious about the rocker bones/head straps part numbers - 6.1 vs apache, they really are a little different...
Speaking of heads, here's the port job on some Apache heads now, with Ferrera 8mm whizbang valves to be backcut and angled, springts, retainers, keepers and guides of suitable spec. Sorry no pics yet., well, maybe one or two...
intake port
exhaust port
chamber clean up
The Techco twin screw should really like a new 4.18x bore block and ported apache heads.
Then again, maybe I could change the lungs, while the engine's out and all...
Cool gadget, but what's it for.....
To control all of this...
Twin Turbo Creations 67/66 ball bearing billet ball buster balls out Jeep turbo kit.
Coated image...
Thanks Chris, with all the success Peter is having with his kit, I am looking forward to bolting this together. The local shop may even let me turn a bolt or two on the clamps besides just holding the flashlight.
Gonna need a new intake manifold...
Also had it ported and machined a beer keg intake to accept a 90mm...
and smoothed the runners and bosses so the air will flow....
Can't have cold turbos..., Chris, the coating done yet?
and I guess I'll need a new badge...
Probably need a Techco for sale thread, too.
So there's the grocery list. Been quietly accumulating for months, which has in itself been lots of fun, especially with a number of different folks competitively running low numbers with turbo kits this summer. Now am running out of things that we don't have. Once heads are completed and delivered, a turbo cam of suitable spec will be designed locally in collaboration with Cammotion. Not going in the shop just yet, first will be heading up the highway a bit to Jason Wood of Wizard Racing for some safety. Maybe its all done in time to make FL in January 2013. Or 2015 at this rate.......