Trying to update my Trinity and can't seem to get the Jeep to show up under the 2012's?
I've applied update "trinity-1r09.crom" with no luck and then tried "trinity_dcx_gas-1r09d_update.crom"
I saw the "1r09c" was the file that seemed to have the support for the 2012 Jeep SRT8s following the other threads, but I don't see that listed for download anywhere?
yeah, email it if you would please. I found the link Mike listed for the C version but it isn't a valid link anymore. I'll PM you my email. Thanks a lot!
Good to know. I was looking all over for the C file and couldn't find it. The link you posted in the other thread was broken. I tried loading the other revision with no luck. Glad you guys are working on taking care of the issue.
C disappeared because it has problems, which I have. They have not figured it out yet for the Jeep. They have figured some of it out for other Chrysler models though. Trucks not bricked, but I'm not comfortable taking it anywhere. So I just tool around in the CL63 enjoying the massaging seats instead. Hopefully I won't have to wait for them to get a Jeep in their shop to resolve issues like they told me they needed. Also told I had the only Jeep with issues. :mofo:
Gotcha. Mine seemed to install without problems. I even did some quick adjustments to raise shift points and throttle booster. It backed up my stock tune without issue. While writing the tune it seemed to have more key on/off requests than what my predator would do on my WK1. It did accept the tune. jeep does drive differently and I watched it shift around 6400-6500 from first to second.
Can you elaborate anymore on what happened during tuning your Jeep?
Mins sometimes has trouble loading tunes. If I modify the tune it wont load the first time. I have to wait for it to go back to the main menu then click on the tune that I wanted and modified then it will load.
not bad Zach, I got a 4.9 0-60 and 1/8 was 8.5. temp was 52. Im at about 2400ft so a little lower than you. I like auto stick shifts better than track mode, to soft. have you tried adding some fuel to see if some knock goes away? im sure your leaner than me with the intake and exhaust
I'd like to monitor the stock tune and see how my STKN I get. See if its a fuel quality issue. Maybe I'll go pick up some race gas a make a mixed tank and see how the 91 tune performs. Maybe load the 93 tune with a race gas mix. That's down the road. I'll put the Jeep back to stock in a couple days when I fly out back to work. Plan is to get a wide band installed whenever I have more free time home and not during the holidays when everything closes.
I'm having the same problem as you first had Mongoose. I don't see an option for Jeep under select vehicle. I also can't seem to find any supporting updates. Is there something I'm missing?