Is SRT suspension different from reg GC? I noticed Eibach makes 1.5" lowering springs for the GC but not the SRT8???

yes...completely different set up.

do a little searching... there have been lots of threads on this. somebody even modified the eibach spings for our trucks

I said it once and I'll say it again. We need a PSS9 system!!

Is SRT suspension different from reg GC? I noticed Eibach makes 1.5" lowering springs for the GC but not the SRT8???

It doesn't make much sense to me either... most people that would lower a GC to begin with would be a SRT owner .. Eibach missed the mark on this one.

I've never even seen a lowered Grand Cherokee in all my years owning a Jeep.

:confused:

It doesn't make much sense to me either... most people that would lower a GC to begin with would be a SRT owner .. Eibach missed the mark on this one.

I've never even seen a lowered Grand Cherokee in all my years owning a Jeep.

:confused:

there are quite a few lowered WK's.......Eibachs only give ya about 3/4"

i just want the back to be even with the front. bring down the rear about 3/4" would make it look right imo

It doesn't make much sense to me either... most people that would lower a GC to begin with would be a SRT owner .. Eibach missed the mark on this one.

I've never even seen a lowered Grand Cherokee in all my years owning a Jeep.

:confused:

Look through the forum. Guys that make their GC look like an srt8 even when thay are not

http://www.cherokeesrt8.com/forums/showthread.php?t=5166

I would love to lower mine, but dont wanna cut the spring and make the ride worse. I love the way they look lowered with black wheels on the black truck.

http://i23.ebayimg.com/02/i/000/91/27/4b62_12.JPG

I'm suggesting Eibach would probably sell quite a few units if they had springs and revised bump stops to lower the rear on the SRT. They're in Corona, CA, maybe a visit or letter with a list of SRT owners showing interest in rear springs would stimulate some R&D.

Anything ever come of this? ...

Lowered SRT Thread (http://www.cherokeesrt8.com/forums/showthread.php?t=5235&highlight=lowering)

perfect height IMO.

I'm suggesting Eibach would probably sell quite a few units if they had springs and revised bump stops to lower the rear on the SRT. They're in Corona, CA, maybe a visit or letter with a list of SRT owners showing interest in rear springs would stimulate some R&D.

Anything ever come of this? ...

Lowered SRT Thread (http://www.cherokeesrt8.com/forums/showthread.php?t=5235&highlight=lowering)

perfect height IMO.

I thought they were in Irvine?

I thought they were in Irvine?

must have moved .. you can see the building off the 91 on the way out to Riverside. Eibach (http://eibach.com/cgi-bin/htmlos.exe/0789.9.2094506668200016831)

I'm going to give Deaver a call to see if they can reverse engineer or maybe rework a set of stock SRT coils to lower the GC about .75" to 1.0". I know they can do it with leafs... they're not cheap, however they do make some of the best progressive rate offroad springs.

http://www.deaverspring.com