Ok it takes some time but I used 0000 steel wool and dipped it in mothers polish and it did wonders!!! Took all the residue outta the pipes and they look great!!!

The steel wool didn't scratch the chrome?

Jus the inside...

One product and its worth the 18 bucks and its called Borla Polish.... That stuff will remove anything from rust to black satins..... I picked mine up from Amazon....

can use the steel wool on the exterior of the tips?

WD-40 then a metal polish.

Never dull!!! That stuff works awesome.

Finally did this the other week and I was shocked how nice the borla tips came out.

Never ~ dull......or blue magic. Can't go wrong with either one.....

I usually use a wheel cleaner first with a brush to get them clean then go at it with blue magic metal polish

Borla cleaner and steel wool. will make the exhaust look brand new.. the steel wool did not scratch the borla s at all..just be gentle

as long as you go gentle and make sure is 0000 steel wool you will be fine. 000 will leave scratches.

almost year old thread pulled up on a comment haha, whats happening with all these lately haha

WD-40

its all the zombie shows and zombie talk - waking threads from the dead....

Mothers polish that's all you need...

Mothers is the product for me, been using it on the exhaust tips for near 30 years... Oh shit I guess Im telling my age now!! It use to be called Mothers Mag Wheel Polish, I used it for the American Racing Mag wheels I had, those were called Slots. Anyone remember??? Anyway, it takes rust off of chrome, stains off exhaust tips...

When you are done using the mothers polish Wipe it down with windex and a paper towel and watch those tits I mean tips shine...........

I just discovered "Never Dull" myself. Is it safe to use on the wheels, too?

dont use never dull on the wheels, keep to exhaust.

blue magic

Never dull

Just got my 2012 srt8 does any one have an idea what keep the incredable amount of brake dust off

Just got my 2012 srt8 does any one have an idea what keep the incredable amount of brake dust off

Ive found with the new design of the '12 rims that they have alot of cracks and crevices, not lending itself to wheel wax or sealant as much. If your looking for a more simple but very effective product check out the Adams Quick Sealant, its an aerosol and with 2 coats you will be able to simply spray the wheel and the dust will come right off, with no agitation. I have used it on my WK1 wheels for months now and have only had to reapply once, can will last you a long time. check it out:

http://www.adamspolishes.com/p-703-adams-quick-sealant-kit.aspx

the kit has an applicator and towel to buff off residual residue, so 30 bucks and your set for more than the entire year, especially with that can. I have done 4 full car (paint and wheels), and have just a little less than half a can left. Worth a try.

grease lighting...small sponge....rinse....mother's

Better than steel wool but hard to get is Bronze wool 0000. It won't ever
rust, and you can clean you glass like new with it. Also put a 4" buffing
pad on your cordless drill and a little scratch remover and you'll polish
those tips like a mirror.