Is anyone interested in a set of four (4) slotted and CAD plated rotors? These are stock rotors which were sent out to Power Slot for the plating and to be slotted. I installed them on my SRT for a little under 100 miles to make sure the fit was still right. This is an extra set I have (have the first set on my Jeep now). If you're interested please let me know. I have pictures of the rotors in the boxes and pictures of the other set on my Jeep if you want to see them both ways.
Price is $600 for the set plus whatever shipping turns out to be. As an FYI, shipping originally cost me $60 ($30 per box) from midwest to NY.

A big issue with our car is the gauging of the rotors from the OEM pads. Are you using the OEM pads? What is your setup and how much of a difference has it made?

Check you pm bx

A big issue with our car is the gauging of the rotors from the OEM pads. Are you using the OEM pads? What is your setup and how much of a difference has it made?

I'm using the stock pads with the new rotors. The guaging is only slightly higher than the stock because of the CAD on there. Under normal driving conditions the difference isn't incredible, but there is a difference under harder braking when there's high heat.

If they are not sold, I'd like them. Please email me at gerickson2@comcast.net

Rotors are still available if anyone is interested