So a pretty good buddy of mine just told me he installed a Little Boy Cam in a Red Rock jeep out of Oklahoma, said he was shocked how hard it pulled in 1st/2nd gear and this is a guy who typically installs Inertia cams and parts...I know who it is :)

So a pretty good buddy of mine just told me he installed a Little Boy Cam in a Red Rock jeep out of Oklahoma, said he was shocked how hard it pulled in 1st/2nd gear and this is a guy who typically installs Inertia cams and parts...I know who it is :)

NIce bro!! Tell your boy to get it dialed in and to Hit the track Wade ASAP!!! Will find out how hard Paulys Beast pulls when I drive his Jeep in 2 weeks... Maybe it will convince me to get a Little Boy as well:D

I haven't spoke to the owner just the installer but the owner is a member on here.

I haven't spoke to the owner just the installer but the owner is a member on here.

Got ya!!! Hopefully he posts up!

Little boy is a good cam down low, congrats to the owner of the new cam

I know who it is too. He's been blowing my phone up for 2 weeks.:lol: Glad he finally got it installed!!

Little boy is a good cam down low, congrats to the owner of the new cam

Down low :confused: I trap 110 that's not enough :D

Down low :confused: I trap 110 that's not enough :D

Don't know bro I think 110 mph is too slow:D hehehehehehe... J/K....

NIce bro!! Tell your boy to get it dialed in and to Hit the track Wade ASAP!!! Will find out how hard Paulys Beast pulls when I drive his Jeep in 2 weeks... Maybe it will convince me to get a Little Boy as well:D

Hey wait a minute , My JEEP isn't enough proof for ya :D

Down low :confused: I trap 110 that's not enough :D

No I do that on stock cam-LOL

No I do that on stock cam-LOL

Buwahahaha.......

No I do that on stock cam-LOL

Well you don't count cuz you're God .

Well you don't count cuz you're God .

I prefer SRT Overlord

I prefer SRT Overlord

HAHAHAHA.... now that's funny right there. You can call me Darth SRT then.

BAHAHAHAHA!!!!!! I just seen this thread! ITS ME ITS ME ITS ME!!!!!:D He did a great job and very inexpensive! I love the cam it runs great! Working on getting it dialed in and trying to figure out how to get some better gas up here.... 91 octane blows. All I know for sure is He is right, But the sad thing is, when he drove it he was driving with an old MHP tune that wasnt even for the cam!!!:eek:... I changed that out and holy cow... I was impressed. Once I get the tune done, I will try and get some track numbers.

Wade, he did say when he gets his motor in his truck I will not be able to hang:eek:...

Thanks for hookin me up with him Wade.

Harry Testiculars! Thanks for answerin all my questions.

BAHAHAHAHA!!!!!! I just seen this thread! ITS ME ITS ME ITS ME!!!!!:D He did a great job and very inexpensive! I love the cam it runs great! Working on getting it dialed in and trying to figure out how to get some better gas up here.... 91 octane blows. All I know for sure is He is right, But the sad thing is, when he drove it he was driving with an old MHP tune that wasnt even for the cam!!!:eek:... I changed that out and holy cow... I was impressed. Once I get the tune done, I will try and get some track numbers.

Wade, he did say when he gets his motor in his truck I will not be able to hang:eek:...

Thanks for hookin me up with him Wade.

Harry Testiculars! Thanks for answerin all my questions.


Nice Chris! I knew it was you man! Congrats on the New Cam man!

Yup congrats man , planning on adding any other mods ?

Sweet man, enjoy it. The littleboy is a great cam.

Chris, I'm glad Sam did a good job for your and sorry about your UD pulley but I never thought they did much on an NA jeep anyway so no loss there. I exhausted all my efforts looking for higher octane gas I stumbled across a Oklahoma mustang forum that listed some gas stations that had 93 one or two were in OKC. I'd try the torco or on track days check with the track and see if they at least carry Sunoco 100 or 104

But you did find some in OKC???? I need to find those! Ya I didnt care about the UD pulley.... I am going to try and find a place and get some straight tolulene I think.

Be careful with that stuff you need to mix it just right

BAHAHAHAHA!!!!!! I just seen this thread! ITS ME ITS ME ITS ME!!!!!:D He did a great job and very inexpensive! I love the cam it runs great! Working on getting it dialed in and trying to figure out how to get some better gas up here.... 91 octane blows. All I know for sure is He is right, But the sad thing is, when he drove it he was driving with an old MHP tune that wasnt even for the cam!!!:eek:... I changed that out and holy cow... I was impressed. Once I get the tune done, I will try and get some track numbers.

Wade, he did say when he gets his motor in his truck I will not be able to hang:eek:...

Thanks for hookin me up with him Wade.

Harry Testiculars! Thanks for answerin all my questions.


Hell yeah bud, welcome to the club. I love this cam in my jeep.

BAHAHAHAHA!!!!!! I just seen this thread! ITS ME ITS ME ITS ME!!!!!:D He did a great job and very inexpensive! I love the cam it runs great! Working on getting it dialed in and trying to figure out how to get some better gas up here.... 91 octane blows. All I know for sure is He is right, But the sad thing is, when he drove it he was driving with an old MHP tune that wasnt even for the cam!!!:eek:... I changed that out and holy cow... I was impressed. Once I get the tune done, I will try and get some track numbers.

Wade, he did say when he gets his motor in his truck I will not be able to hang:eek:...

Thanks for hookin me up with him Wade.

Harry Testiculars! Thanks for answerin all my questions.
I'm guessing you're the guy I attempted to follow over the overpass just outside Ponca City...

Let me tell ya what, that thing sounds FREAKING AWESOME!!!! I've never ran across a Jeep SRT8, but when I rolled up behind that thing and heard it, I was like "MOTHER OF GOD!".

And when you took off, I couldn't help but try and keep up just to listen to more of it!! HAHA.


Anyways, I had to look this forum up after that little jaunt! Let me know a time I can come and look that thing over!

Any results with the lil'boy moron ...

I'm guessing you're the guy I attempted to follow over the overpass just outside Ponca City...

Let me tell ya what, that thing sounds FREAKING AWESOME!!!! I've never ran across a Jeep SRT8, but when I rolled up behind that thing and heard it, I was like "MOTHER OF GOD!".

And when you took off, I couldn't help but try and keep up just to listen to more of it!! HAHA.


Anyways, I had to look this forum up after that little jaunt! Let me know a time I can come and look that thing over!

If it was dark red/maroon and had some goofy guy driving that looks like he flings poo at people and then yes it was him :)

I'm guessing you're the guy I attempted to follow over the overpass just outside Ponca City...

Let me tell ya what, that thing sounds FREAKING AWESOME!!!! I've never ran across a Jeep SRT8, but when I rolled up behind that thing and heard it, I was like "MOTHER OF GOD!".

And when you took off, I couldn't help but try and keep up just to listen to more of it!! HAHA.


Anyways, I had to look this forum up after that little jaunt! Let me know a time I can come and look that thing over!

Yep! That was me! You can stop by and see it anytime! Send me a PM with your number and I let u know when I'm free. I was just excited someone was wanting to race! Nobody ever does in this crap town..... And how in the world did u find me!?!?!

Any results with the lil'boy moron ...

I am going to the next test-n-tune if the weather permits. So I hope to have numbers this coming weekend.

If it was dark red/maroon and had some goofy guy driving that looks like he flings poo at people and then yes it was him :)

How did you know I throw my poo???? How was Atco? Wish I could have came.

Yep! That was me! You can stop by and see it anytime! Send me a PM with your number and I let u know when I'm free. I was just excited someone was wanting to race! Nobody ever does in this crap town..... And how in the world did u find me!?!?!
Well after running into you that evening, I had to check out what the hell that was, so I joined this forum to educate myself on what stomped my ass.

I checked the regional section to see if there were any around here and ran across you posting for the majority of the area and saw you were from Ponca City. Maroon SRT8, figured it had to be you.

I'm pretty much booked up this week with the holidays going on, but I'll definitely have to meet up with you and convince you to let me ride shotgun for a test ride.

Nice good luck bro ... the torque that this cam puts down amazes me..

Well... Tracks around me are shut down for the season...Too cold for them I guess... So I have to wait until next year to know what my jeep runs!!!

Well... Tracks around me are shut down for the season...Too cold for them I guess... So I have to wait until next year to know what my jeep runs!!!

That is a bummer. I know you were itching to hit the track too.

im looking for a good dyno/tune near okc. kno of any???

Not really.... I got my tune from Johan..... I got to tulsa more than the city tho... PM importassasyn03. he lives int he city and has his stuff done down there somewhere.