Hey guys,
just a quick question for you guys in Mass, does anyone know where a good shop for me to take so that I can throw on the exhausts and other stuff.

Thanks,

Where abouts in MA are you? What other parts do you have to install? Is it just a cat back or headers and cat back? I replaced my cat back in my driveway with the Jeep up an jackstands. I agree it is much easier in a shop with a lift, but I couldn't wait anymore.

If you want to drive about 40 min to RI your search is over , hit me up as we have great experience with the JEEP SRT hehe .

Where abouts in MA are you? What other parts do you have to install? Is it just a cat back or headers and cat back? I replaced my cat back in my driveway with the Jeep up an jackstands. I agree it is much easier in a shop with a lift, but I couldn't wait anymore.

I'm in the Watertown/Waltham area, but anything near Boston is good to me. Yeah I know what you mean, my exhausts should be coming in in two or three days so if I don't find a place looks like I am gonna do it right here :p.

If you want to drive about 40 min to RI your search is over , hit me up as we have great experience with the JEEP SRT hehe .


:p Thanks man, appreciate it but looks like I'm gonna try Mass first.

My friend owns an exhaust shop here in Billerica where I live. About 20 minutes from you. He installed my Borla system for me.

Now that I think about it, he installed my Bwoody springs, sway bar links, Addco sway bars, R1 rotors and Hawk pads too.

R&D Custom Exhaust
Innis Drive
Billerica MA
Owner: Rick Soley

Also, Accurate Automotive in Burlington MA is great for tire mounting. They have a brand new $30,000 tire mounting machine, and they don't care who you buy the tires from. They also have a StarScan computer, so I may use them in the future for repairs. When I was there a few weeks ago getting my tires mounted, there was another SRT8 Jeep there getting engine repairs done. Apparently the guy broke a valve spring in his bone stock 07 at 65,000 miles, did quite a bit of damage to the engine. So they have some experience with our Jeeps, but they have no experience with Jeep SRT8 performance parts.

ESP (Enhanced Street Performance) in Sterling MA is the most knowledgeable and equipped by far. They have an AWD Mustand dyno. Labor rate is $80 per hour. They can do anything. They did my Tq converter, stage 2 valve body, ported intake manifold and Throttle body. Bill from Paramount has been recommending them for installs of their products, and the core charges are usually waived when they install (allways check with Bill first though). My Jeep is going there again Monday for Nitrous install and dyno runs, and my dad's 62 vette is getting trailered there Monday as well to repair an oil leak.
They are a bit out of the way, I drive 45 minutes to go there, and have Enterprise rent a car pick me up at their shop when I need to leave it. From Waltham/Watertown area, you can shoot straight out rt2, it wouldn't be too bad of a ride.

R&D Custom Exhaust
Innis Drive
Billerica MA
Owner: Rick Soley

I went there to have my first exhaust put on my first car because I was a noob to anything mechanical then .. A 95 Taurus SHO:rocker: HAHAHA

Now that I think about it, he installed my Bwoody springs, sway bar links, Addco sway bars, R1 rotors and Hawk pads too.

R&D Custom Exhaust
Innis Drive
Billerica MA
Owner: Rick Soley

Also, Accurate Automotive in Burlington MA is great for tire mounting. They have a brand new $30,000 tire mounting machine, and they don't care who you buy the tires from. They also have a StarScan computer, so I may use them in the future for repairs. When I was there a few weeks ago getting my tires mounted, there was another SRT8 Jeep there getting engine repairs done. Apparently the guy broke a valve spring in his bone stock 07 at 65,000 miles, did quite a bit of damage to the engine. So they have some experience with our Jeeps, but they have no experience with Jeep SRT8 performance parts.

ESP (Enhanced Street Performance) in Sterling MA is the most knowledgeable and equipped by far. They have an AWD Mustand dyno. Labor rate is $80 per hour. They can do anything. They did my Tq converter, stage 2 valve body, ported intake manifold and Throttle body. Bill from Paramount has been recommending them for installs of their products, and the core charges are usually waived when they install (allways check with Bill first though). My Jeep is going there again Monday for Nitrous install and dyno runs, and my dad's 62 vette is getting trailered there Monday as well to repair an oil leak.
They are a bit out of the way, I drive 45 minutes to go there, and have Enterprise rent a car pick me up at their shop when I need to leave it. From Waltham/Watertown area, you can shoot straight out rt2, it wouldn't be too bad of a ride.


Sounds good to me... il check him out as soon as my exhausts get here.. the mopar super center shipped it to the wrong address and I've been waiting for a cpl of weeks now :(

I went there to have my first exhaust put on my first car because I was a noob to anything mechanical then .. A 95 Taurus SHO:rocker: HAHAHA


;p LOL!! how did it sound?!!

;p LOL!! how did it sound?!!

Pretty good. It was a different tone due to the high revving 3.2L Yamaha engine they came with but sounded good to me.