As of May 3rd 2010, PWR East was created. Formerly Rt 6 Motorsports, Brad King and My self Brad Tunstall are the Richmond, Va location of PWR. We are a part of the PWR Team based out of Alabama and are here for any and all GEN III Hemi Performance and Styling needs. As you all know Brad King has been around for many years in the automotive business and can handle all installation, fabrication, body work, and tire needs.



Right now we are all a little busy with our Dyno Day/ Meet and Greet being held here in Richmond Va this weekend trying to get several cars finished up to get out and meet everyone.



We delivered a Silver Challenger last week to a very happy customer that had recently brough the car down to have a PWR 426, heads, cam, 100 mm TB, Ported Intake Manifold, 3000 stall converter, and the transmission solenoids for much firmer and quicker shifts. While here we tinted the windows for him, debadged the car, replaced the brake pads to EBC reds for better stopping power and to get rid of the dredded brake dust, installed long tube headers and high flow cats to let this beast exhale a little better, full detail of the car, and had some waves removed from the front fenders. Needless to say this was a very happy guy last night picking this beast up.



I got a message from him that read "OMG!!! That's all I can. The car has exceeded my dreams. It was damn near impossible to control my right foot on the 79 mile drive home last night. Did do some auto stick getting onto I95 and about crapped my pants. I'm going to have to learn how to drive this beast all over again. Thanks guys for everything." Another Happy PWR Customer.



We also have a SRT8 Jeep being finished up with a Whipple supercharger installed with, upgrade TB, and Kenne Bell Boost a Pump. We expect to have him completed in a couple of days.



We have 06 SRT8 300 in the shop getting PWR Heads, Cam, Intake Manifold, and TB installed along with debadging and demolding, deep dish grill, Tinted Windows, smoked tail lights, SRT8 Challenger Wheels, EBC brake Pads, repair to the front clip from a major incident with a parking curb. This car will deffinently make you look twice when completed. The car will also be fully detailed to remove the years of grime and grit from the paint and engine bay.



Another Challenger in the shop Black SRT8 six speed which has already had the PWR 426 put in the car and was going to go with a whipple supercharger, but has changed his mind to go with the Hellion Twin Turbo setup. This car is getting a cage, PWR 426, heads, cam, Hellion Turbos, Aluminum fabricated coolant over flow and power steering reservoirs, Stock Srt wheels were widened in the back to accomodate 315 Nittos in the back and 255 nittos in the front. Eletronic exhaust cutouts have been added, NOS for that little bit more, custom interior work for the numerous switches and gauges needed for the monster. This car will also be another double take.



We have a 5.7L 300 coming in a week for the Getrag setup along with upgraded driveshaft and drive shaft loop.



Lastly is my car, 08 Challenger, right now the build is for the biggest cam in the stock 6.1 out there. PWR Heads, Cam, Intake, 100mm TB, solenoids.



Pics of all of this to follow.



Wow are we busy. Please feel free to contact myself via pm or email



Brad Tunstall PWR_Brad or pwr.brad@gmail.com



Thank you


http://i834.photobucket.com/albums/zz263/PWR_brad/IMG_1875.jpg
http://i834.photobucket.com/albums/zz263/PWR_brad/IMG_1881.jpg
http://i834.photobucket.com/albums/zz263/PWR_brad/IMG_1889.jpg
http://i834.photobucket.com/albums/zz263/PWR_brad/IMG_1890.jpg
http://i834.photobucket.com/albums/zz263/PWR_brad/IMG_1887.jpg

Check out these powder-coated wheels. Even the inside of the rim got the treatment. The guys at PWE also created this grill for the 300 with an awesome PWR emblem.

http://i861.photobucket.com/albums/ab175/PW-Racing/PWE/IMAG02551.jpg
http://i861.photobucket.com/albums/ab175/PW-Racing/PWE/IMAG0258.jpg
http://i861.photobucket.com/albums/ab175/PW-Racing/PWE/IMAG0257.jpg
http://i861.photobucket.com/albums/ab175/PW-Racing/PWE/IMAG0256.jpg
http://i861.photobucket.com/albums/ab175/PW-Racing/PWE/IMAG0254.jpg
http://i861.photobucket.com/albums/ab175/PW-Racing/PWE/IMAG0253.jpg
http://i861.photobucket.com/albums/ab175/PW-Racing/PWE/IMAG0252.jpg

http://img.villagephotos.com/p/2003-12/542530/DSCF0009.JPG
http://img.villagephotos.com/p/2003-12/542530/DSCF0012.JPG
http://i818.photobucket.com/albums/zz107/srt8challenger/Tims%20Car/bigrim.jpg

http://i834.photobucket.com/albums/zz263/PWR_brad/IMG_1861.jpg
http://i834.photobucket.com/albums/zz263/PWR_brad/IMG_1860.jpg

Very cool Andy

Good stuff. Looks like you are very busy!

Andy, I am glad to have Brad working on my jeep. I know it is in good hands and it will return done right and me with a big :D

I did already have one guy in line to drop his jeep off there for some work down the road, and I know myself will continue to do so. Not sure if Brad got into details on what we had in mind, but it will be the first in the jeep world and look insane!!


ALso, saw Tim's rims today in person at the Challenger meet and WOW, they look perfect and insane!!

http://i667.photobucket.com/albums/vv36/BOYCHIKS/Whipple/DSC_0552.jpg

Andy, Brad, & Brad......
I just hope you guys can keep up, lol. :) The biggest demise of ANY good company, that I've seen "blow up" like this, is a begin in lack of GREAT customer service, ie: taking a week just to get someone a quote on a H/C/I package. Or taking 4 days to answer a simple question. Don't get so busy, that you forget how precious good business is. More importantly, don't get so busy that you forget how precious good CUSTOMERS are!! You guys will have a LOT on your plate, there's a lot of people modding the hell out of their rides right now. I'm one of them (looking to do a blower on my 426 :) ).

Anyway. You guys have some AMAZING services to offer. The additions of powdercoating, auto detailing, and some of the smaller cosmetic stuff will open a HUGE door. Now people don't have to go multiple places to get the "end result" achieved. Kudos to you boys. SICK ideas so far. Best wishes to you all. And in case you were wondering, we all LOVE tons of pics. So whore it up fellas!!! :D

PS - Did you guys widen those wheels, or someone else??

^^ I think they sent the rims off..

I took some pictures today of them, and all I can say is WOW :eek:

http://i667.photobucket.com/albums/vv36/BOYCHIKS/Chally%20meet/DSC_0713.jpg
http://i667.photobucket.com/albums/vv36/BOYCHIKS/Chally%20meet/DSC_0711.jpg
http://i667.photobucket.com/albums/vv36/BOYCHIKS/Chally%20meet/DSC_0712.jpg

Welcome to VA!!!!!

Where can I get some of those PWR stickers?.....:D

^^ You and me both ;)

Sounds good Andy...It's nice to know you're only 3 hours south of me now...I'm always in Richmond visiting my bro....

Hey Johnny how far away is PWR from Short Pump?

Sounds good Andy...It's nice to know you're only 3 hours south of me now...I'm always in Richmond visiting my bro....

Hey Johnny how far away is PWR from Short Pump?

15-20 minutes tops.

^^ You and me both ;)

Hell yeah, or something like a liquid dome or like the srt8 badge with the PWR // on it.....hint hint........:D.....cough cough....what do ya think Andy?...:D

Andy better be sending you a monthly check for that.

Andy better be sending you a monthly check for that.

I'm hoping so.... :lol:

Next time your down, call me and we will ride up there.

Here are some pics of the 300 in the shop. Recap of the build:

PWR Stage 3 heads and Cam
Ported and Polished Intake Manifold
100 MM TB
Debadged and Demolded
Complete detail of the car, polished to ultra shine
Custom Grill
Tinted tails
Color matched marker lights
SRT Chally Wheels staggered 245 front 255 back
Tint
Chrome delete

Well here are some of the pics to show the progress.
http://i834.photobucket.com/albums/zz263/PWR_brad/Dinos%20300/Dino1.jpg
http://i834.photobucket.com/albums/zz263/PWR_brad/Dinos%20300/Dino2.jpg
http://i834.photobucket.com/albums/zz263/PWR_brad/Dinos%20300/Dino3.jpg
http://i834.photobucket.com/albums/zz263/PWR_brad/Dinos%20300/Dino4.jpg

Tell Brad I said Hi, Its been a while.

Tim C

Hey Andy, who is handling the tuning on your installs?

^^ I know Johan is doing mine and a few others...

BTW, that 300 in person looks great with the new front grill; gave it a whole different look!

Brad is a good and nice guy! -Both of them

Hey guys,

Sorry I have been away for a while. Had to straighten out some things on my end to get back on the message boards but I am finally here.

Johnny's jeep turned out sick, 447 at the wheels on 6.7lbs of boost. very conservative tune, for a daily driver.

SRT, you are absolutly right about the customer service. That is the whole reason I was brought on board was to be that person to go to for quotes, answers, updates, all of that stuff. Johnny can tell you, he lives down the road from me and any little issue PWR will go out of the way to make sure the customer is left feeling appreciated and welcome.

There is a bunch of stuff going on right now, but any questions or quotes or concerns please feel free to email or pm with anything.

Mondo send me a quick email, I think we could talk about something.

Guys look forward to hearing from you all.

Thanks
Brad

What is the Contact info for Ashland?

That would be me.

Feel free to email me at pwr.brad@gmail.com

or pm me.

Brad King never really gets on the forums. I am trying to keep him busy

I mean the Address.... I just wanted to map it from my house down 95....

12189 Maple Street
Ashland, Va 23005

Man I cant wait to get that black challenger along with Todds 300 on the dyno. Both are Twin Turbo monsters capable of 1000rwhp. Hopefully within the next 4 weeks you will see dyno results as well as track results.

+1 on the challenger Andy :D

I cant wait to get the monster under the hood myself.

Well I can't wait to have my jeep back in there...


Idk what to tell dad this time. :lol:

Cool. You guys are about 2 hours away from me. What's your install rates? Or how much to install cam and headers? Thanks.