GlobeWarmer09
03-10-2010, 06:52 AM
As the title says, I'm going to convert to HID lows and fogs. I have decided to go with the 4300k temp for the best light output and classiest look and want to go with the XenonDepot kits for the exceptional quality.
My question is: when you look up the kits, they have a hundred different ones (like 9007 Xtreme HID conversion kit etc. etc...) what do I go with for the lows and fogs for my '09? Thanks!
DCSpecial
03-10-2010, 08:33 AM
If you currently have halogen lights in the low beams you would need 9006 for the lows and 9145 (aka H10) for the fogs.
You can look up all the bulb sizes here:
http://www.sylvania.com/ConsumerProducts/AutomotiveLighting/LampReplacementGuide/
GlobeWarmer09
03-10-2010, 08:43 AM
If you currently have halogen lights in the low beams you would need 9006 for the lows and 9145 (aka H10) for the fogs.
You can look up all the bulb sizes here:
http://www.sylvania.com/ConsumerProducts/AutomotiveLighting/LampReplacementGuide/
I can always count on this forum for the best info. Thanks a lot DC.
GlobeWarmer09
03-10-2010, 11:47 AM
One more question. Will I have any problem with the projection pattern of the light by just installing one of these kits?
Knuckles
03-10-2010, 01:12 PM
One more question. Will I have any problem with the projection pattern of the light by just installing one of these kits?
Normally guys don't, but if you do I am sure there is a screw you can use to level them off. Also I have seen some cars with an acutal level meter on top of the Headlight, but not sure on the Halogen housing ones.