Gsm Ported Manifold [Archive] - Cherokee SRT8 Forum

: Gsm Ported Manifold


generalconfusion
04-18-2007, 06:12 PM
Just wanted to post some pictures of the GSM ported and port matched manifold with phenolic spacers......seems to work.




Phenolic spacer with new gaskets
http://i77.photobucket.com/albums/j66/sgtstanko/factorygasketsspacersonsm-1.jpg

GSM ported manifold.....the manifold is also "cleaned" up/ported inside, not shown.
http://i77.photobucket.com/albums/j66/sgtstanko/portedintakesm.jpg

Picture of stock manifold with spacer and gasket layed on top.....notice the stock intake port is smaller than stock head gasket. The aluminum step is not the sides but the actual material from the manifold runner being smaller than the port.
http://i77.photobucket.com/albums/j66/sgtstanko/portedintakestocksm.jpg

http://i77.photobucket.com/albums/j66/sgtstanko/jeepvalvecoversilversm.jpg

tommy25000
04-18-2007, 06:43 PM
how much $$$$$$$????????? you didnt 2,800 did you?

Crank
04-18-2007, 06:45 PM
Hey sarg. will we pass emissions if we port out heads and intake?

generalconfusion
04-18-2007, 06:51 PM
This is a ported manifold only!

Yes it would pass......check out my latest dyno test with all parts combos....now i just need a tune!!!

GSM sells the manifold for about $395 exchange.....works great with the spacers!

tommy25000
04-18-2007, 07:13 PM
whats the labor to do this?
and if you could how about a link to this product... i couldnt find it

Goldengreek5
04-18-2007, 07:21 PM
Sarge, did you get longer bolts with the spacers? Since you are using 2 gaskets?? Scott is sending me another gasket. Not sure if I'm getting longer bolts.

Crank
04-18-2007, 07:22 PM
Oh but if we do the heads then i will fail right?

GotStroke?
04-18-2007, 08:00 PM
Oh but if we do the heads then i will fail right?

No, ported heads and/or intake won't cause you to fail emissions. Your choice in cam will make or break the combo. Obviously if you're in CA longtubes will cause you to fail the visual inspection as well. Though I'm sure there are a few "friendly" test facilities you can find.

GSM
04-18-2007, 09:41 PM
whats the labor to do this?
and if you could how about a link to this product... i couldnt find it


labor is about 150 on the manifold switch and the spacers, its really nice to do them both at the same time


Scott

GSM
04-18-2007, 09:43 PM
Sarge, did you get longer bolts with the spacers? Since you are using 2 gaskets?? Scott is sending me another gasket. Not sure if I'm getting longer bolts.


I sent everyone the complete upgrade

longer bolts and washers

2 new factory gaskets

new install instructions


Scott
GS Motorsports
562.777.1075

FastSRT8GC
04-18-2007, 09:48 PM
GSM, Do you have these in stock now???

HoustonSRT-8
04-18-2007, 10:09 PM
Any dynos or time slips to show much much just the ported manifold is worth?

tommy25000
04-19-2007, 12:55 AM
Any dynos or time slips to show much much just the ported manifold is worth?

on the web site there is #'s i saw it earlier but cannot find it now... i thinks its 5 awhp:rolleyes: not bad i guess

GSM
04-19-2007, 05:14 PM
GSM, Do you have these in stock now???


we have 5 cores




Scott
GS Motorsports
562.777.1075

Inferno SRT8
04-20-2007, 02:33 PM
Scott I just ordered 20 bolts and washers from Ryan and he told me you guys are awaiting the push pins, he said they would be there monday. I had Ryan hold off on the order as I need the bolts etc by wednesday of next week, im having the parts next day air to me, can you please let me know if you guys get the pins in by monday and keep me posted. Thanks, Anthony

Hallstar
04-20-2007, 10:08 PM
I sent everyone the complete upgrade

longer bolts and washers

2 new factory gaskets

new install instructions


Scott
GS Motorsports
562.777.1075
Hey Scott...
I didn't receive any longer bolts or spacers with my Phenolic Gaskets!!!
WAITING...HALLSTAR TINT & DETAIL INC.