Stainless Works **GROUP BUY** [Archive] - Cherokee SRT8 Forum

: Stainless Works **GROUP BUY**


SOUTHERNHOTROD
04-18-2007, 01:10 PM
Hello all!

We have a Stainless Works "GROUP BUY" going on!

This will include Headers, cats, and catbacks!

We will need 5 orders to make this work. That's right just 5!

PM or call me for pricing!

:D
08MAY07:
2 orders have been placed!

HoustonSRT-8
04-18-2007, 01:14 PM
I hate being in between extra cash when these deals come up. :(

SOUTHERNHOTROD
04-18-2007, 02:19 PM
I hate being in between extra cash when these deals come up. :(
Let me know when you get the extra cash... I'll hook you up! :D

srt8 for me
04-18-2007, 04:10 PM
whats the $ for them ?

SOUTHERNHOTROD
04-18-2007, 04:44 PM
whats the $ for them ?
PM sent! :D

srtphilly
04-18-2007, 05:00 PM
are there any sound clips available?? how does this exhaust sound?? is it louder than the b&b or corsa??

SOUTHERNHOTROD
04-18-2007, 05:12 PM
are there any sound clips available?? how does this exhaust sound?? is it louder than the b&b or corsa??
Check this out....

http://www.cherokeesrt8.com/forums/showthread.php?t=3819

viperrt
04-18-2007, 11:09 PM
Ok, so what is the big deal about simply posting the group buy price? Do I also need a secret handshake to purchase? Post the price and you just might get more than 5 orders. Bill

HoustonSRT-8
04-18-2007, 11:11 PM
Ok, so what is the big deal about simply posting the group buy price? Do I also need a secret handshake to purchase? Post the price and you just might get more than 5 orders. Bill
It might have something to do with the suppliers having a "Lowest Allowable Advertised Price". He is not allowed to advertise the product below X amount of dollars, but he is allowed to sell it below X. Posting it would be advertising, while a PM would be like talking to him on the phone.

SOUTHERNHOTROD
04-18-2007, 11:20 PM
It might have something to do with the suppliers having a "Lowest Allowable Advertised Price". He is not allowed to advertise the product below X amount of dollars, but he is allowed to sell it below X. Posting it would be advertising, while a PM would be like talking to him on the phone.
Yep. What he said. :D

SOUTHERNHOTROD
04-18-2007, 11:24 PM
Ok, so what is the big deal about simply posting the group buy price? Do I also need a secret handshake to purchase? Post the price and you just might get more than 5 orders. Bill
PM sent! :D

HoustonSRT-8
04-18-2007, 11:26 PM
Yep. What he said. :D
I get a cookie! :D

Mango
04-19-2007, 06:24 AM
I gotta say guys, Edwin @ SouthernHotRob is one of the best vendors I've EVER delt with....through brick & morter and online stores. I made a booboo and forgot to specify I needed expedited shipping for my Volant, and he sent me a FREE cleaning kit even though I SCREWED UP!

If I didn't just blow a wad of cash for the next NPPL Paintball Tournament I'd be all over this.

GodfatherSRT8
04-19-2007, 06:54 AM
I looked though the link, but didnt see a sound clip or video. Only pics. Did I miss something??

HoustonSRT-8
04-19-2007, 09:38 AM
I looked though the link, but didnt see a sound clip or video. Only pics. Did I miss something??
I don't believe one has been released.

sanscritt
04-26-2007, 04:42 PM
PM sent! :D


Me too please:o

-Jerry

AlexT
05-06-2007, 05:10 PM
Has this group buy gone off already?

Edwin, can you PM me header pricing?

Alex

Derwood98
05-06-2007, 05:12 PM
Me too please.

SOUTHERNHOTROD
05-08-2007, 09:09 AM
Me too please:o

-Jerry
PM sent! :D

SOUTHERNHOTROD
05-08-2007, 09:10 AM
Has this group buy gone off already?

Edwin, can you PM me header pricing?

Alex
PM sent! :D

SOUTHERNHOTROD
05-08-2007, 09:11 AM
Me too please.
PM sent! :D

SOUTHERNHOTROD
05-08-2007, 09:12 AM
First post updated.

This "Group Buy" will end on 18MAY07.

3 orders to go! :D

OK2PLAY
05-08-2007, 06:57 PM
Me too please. My wife will think that I'm trying to get better gas mileage.

copmagnet
05-08-2007, 07:38 PM
I would like to know the group buy price as well.

gbusy1906
05-08-2007, 10:15 PM
I would like performance numbers before I purchase. I will be doing the install which takes about 6-7 hrs. If there is no reasonable hp/tq gain, I rather no waste my money and time. Show me some dyno numbers for these headers so we all can made an informed decision. Kooks headers are larger in diameter and make about 20hp/20tq. I went to your w/s to take a look at the Stainless Works Headers but did not see a listing for them. I believe these headers are 1-3/4 in diameter. Do they come with cats? PM me the price and some info.
thanks,
Busy

GotStroke?
05-09-2007, 12:59 AM
I would like performance numbers before I purchase. I will be doing the install which takes about 6-7 hrs. If there is no reasonable hp/tq gain, I rather no waste my money and time. Show me some dyno numbers for these headers so we all can made an informed decision. Kooks headers are larger in diameter and make about 20hp/20tq. I went to your w/s to take a look at the Stainless Works Headers but did not see a listing for them. I believe these headers are 1-3/4 in diameter. Do they come with cats? PM me the price and some info.
thanks,
Busy

Yes they are 1 3/4" Primaries with 3" collectors, 3" metallic substrate 300cpi cats, and 3" catback.

Everything you wanted to know about them here:

http://www.cherokeesrt8.com/forums/showthread.php?t=3819

I'll have WOT sound clips up in about a week and a half finally.

Based on the restrictions in the stock system the SWorks setup should be worth ~35-40hp at the flywheel on a stock longblock Jeep. You may need a tune to see these numbers however, as explained in the linked thread.

blown65
05-09-2007, 01:33 AM
pm pricing plz

BBLV
05-09-2007, 01:34 AM
A tune is always going to make intake, header, and exhaust mods show better gains. I can't imagine them making a whole lot of power (i.e. 40hp) without a tune.

You're buying it for the sound though, right?? :)

gbusy1906
05-09-2007, 02:23 PM
I would rather have numbers supported by dyno or before/after track times. Just to estimate is not a guarantee.

I recently took a chance on the B&G tune. My track times improved by almost 3 tenths.
There are CAI and Catback Systems that actually hurt performance. I had that experience already and would like to leave it in the past.

Again, what is the price for the headers with cats? PM me please

GotStroke?
05-09-2007, 05:15 PM
I would rather have numbers supported by dyno or before/after track times. Just to estimate is not a guarantee.

We'd all like guarantees, however in real life that doesn't happen all the time. The "estimate" came from Al Noe who was the GM at SWorks until recently (left to run Trick Flow for Summit), and as far as unbacked claims go, his word is pretty much gold.

I recently took a chance on the B&G tune. My track times improved by almost 3 tenths.

Case in point, some have gained with the B&G, others haven't.

There are CAI and Catback Systems that actually hurt performance. I had that experience already and would like to leave it in the past.

Some CAIs may but I haven't seen a catback that's hurt power yet. To be fair I haven't seen much if any data on the Zoomers CB.

Again, what is the price for the headers with cats? PM me please

Regular pricing is included in the post I linked, can't help with the GP price.

To put it another way, have you ever seen a quality full exhaust (regardless of brand) actually lose HP vs. the stock crap? I haven't.

Mango
05-12-2007, 07:58 PM
I want to do this! Edwin, sent you a PM. :) :)

SOUTHERNHOTROD
05-14-2007, 08:18 AM
Me too please. My wife will think that I'm trying to get better gas mileage.
PM sent! :D

SOUTHERNHOTROD
05-14-2007, 08:19 AM
I would like to know the group buy price as well.
PM sent! :D

SOUTHERNHOTROD
05-14-2007, 08:19 AM
pm pricing plz
PM sent! :D

SOUTHERNHOTROD
05-14-2007, 09:21 AM
I want to do this! Edwin, sent you a PM. :) :)
PM sent! :D

m3_il
05-14-2007, 06:46 PM
so how much is it?

BahnBlastR
05-14-2007, 09:38 PM
PM with pricing please -- thanks!!

danman_s
05-16-2007, 12:25 PM
Would love a PM with pricing as well. I'm running the Corsa catback and will need the full set that goes from the exhaust ports right to the catback flanges /w the cat's, etc. Plus I'm in Canada, will you guys ship up here?

SOUTHERNHOTROD
05-16-2007, 01:44 PM
so how much is it?
PM sent! :D

SOUTHERNHOTROD
05-16-2007, 01:44 PM
PM with pricing please -- thanks!!

PM sent! :D

SOUTHERNHOTROD
05-16-2007, 01:45 PM
Would love a PM with pricing as well. I'm running the Corsa catback and will need the full set that goes from the exhaust ports right to the catback flanges /w the cat's, etc. Plus I'm in Canada, will you guys ship up here?
PM sent! :D

SRedrockT8
05-19-2007, 10:52 PM
i'd like a quote. i want to use my new corsa catback i bought from you so a price for everything ahead of the catback.

thanks, pete

SilveRT8
05-20-2007, 01:32 AM
Would like pricing for headers and cats only, I want to keep my stock catback wich is modified for a hitch, also in Canada
Claude

ABeasst
05-23-2007, 08:32 PM
would like pricing for headers with cats. I dont plan on changing the catback.

Crank
05-23-2007, 08:39 PM
I would also like pricing for headers wit cats.