I was going to do the Eibach's, I have a set at the local parts store, I want to lower but still want a rake look, I like it better and when loaded with crappola it will still sit higher in the rear. The roads here suck goat arse so I'm sceptical even with the bump stops modded I'll like the ride with Eibach's. So, I figured some red Bwoody's and links to match the calipers:), and use a .6" spacer in the rear I can easily fab up, anyone do this yet? I will use alum if I they will stay in place under a load, if not, steel machined and welded in place.

Better ride with the bwoodys and still an eibach look, sounds good to me!

Back to the q, anyone done this yet? Any negatives?

Thanks Amigos!

Mike.

Well I'm doing the bright red springs and links from Tom@MHP, and machining a set of spacers to keep the rake. Will share spacer specs with Tom, might be interest for some of you guys to get the better ride but the Eibach rake, extra price of course. No royalties neccessary Tom!!:)

update? interested in this mod for sure!!!

Springs and links are ordered, will do spacers once everything is on the hoist. Talked with Capt'n Bernie:) on staying within our forum boundaries and making some extra's for members, it's a pretty straight forward outline of what would be making stuff for resale is being a vendor (I don't get any sleep or spare time running a mill let alone a hobby project, a RELIABLE hobby project), so I'll do a set for myself and send a set to Tom@MHP, he can run with that one for owners who still want a rake, or someone who's a vendor anyway, but Tom will get dibs if he's interested:)