In my C6 i have a V1 with a mount that mounts under the mirror. It looks very flush and OEM. I also have whats called an Invisicord that connects to the V1 and powers from the back of the mirror. So the whole setup is very stealthy and flush. With no wires exposed.

Do you guys know if these type of accessories are available for our jeeps?

Thanks

If you look at this site under Corvette items you can use the visor mount (slightly trimmed and bent) in the Jeep:
http://greatlakestrophies.com/


I have the one they sell for the Passports in my Jeep and it works great. Keeps it pretty well hidden, easy to see and I have a Passport hardwire cord so that I have a mute button down low, easy to reach (not sure if V1 has something similar).

I haven't tried this myself, but this looks like it could work:

http://www.blendmount.com/valentine.html

i have the c6 V1 mount from the place DC has linked above. works fine.
I also have the invisicord on my V1.

i have the c6 V1 mount from the place DC has linked above. works fine.
I also have the invisicord on my V1.

Ditto. Required a little cutting of the visor clip and the mount from greatlakes, but it works great!

I'm gonna do similar with the visor clip for my Escort. My mirror on the backside has a cutout similar to a thick visor. Clips right on, but sticks a little too far forward, so I need to make my own bracket. Those suction cup windshield mounts are crap! What I'd like to do is find some kind of plastic shroud to go around the big box where the mirror mounts so it hides the detector and looks factory.

wink

NOTICE THE VISORS: STICKER FREE SUCKERS

http://i300.photobucket.com/albums/nn11/robpp/base/22_1.jpg

http://i300.photobucket.com/albums/nn11/robpp/base/IMG_0331.jpg

http://i300.photobucket.com/albums/nn11/robpp/base/IMG_0333.jpg