Is anyone using the Billet Tech Catch Can that attaches onto the strut tower brace?? jeepCatchCan is the code on their site.. Thanks this forum rocks.

yeah i have it and and a catch can is a must imop

Ok I am going to order it today. What about the lines? Should I get braided or are the ones that come with it good enough. OH sorry I am not sure what imop means.
Check my site I do some nice interior work. wjautotop.com

my bad its imo(in my opinion). I have had the original lines on for about 6-8 months but have just got the braided lines in. I didnt have any problems with the original ones but the braided are supposed to be better. im checkin the site now:D

Here (http://www.custombilletstore.com/product_p/3018.htm), get the braided lines, they'll last forever, the basic rubber hoses they use will go bad from the inside out, many here and in the CM forums testified to that result.

I ran the regular lines for like 2 days and changed to the braided ones. They look better and feel better. Also I bought the brass fittings to cuz it comes with the plastic ones, not a neccesity just made me feel better

BT is thinking of bringing back their clear top, clear bottom and full clear units. Might want to ask what's happening about that.

Bernie

I've been using the orig. lines for about 1.5 years now. No problems...... at least I know of. Maybe I should check them tonight?

Thank you everybody.

I'm going to order one tomorrow. Not sure which bracket I should go with however. I ordered a Volant CAI today, so whatever works best with that.

Any suggestions?

wink

If you're ordering now, don't plan on installing any time soon. I've been waiting two weeks for my order.

I never knew a can and two steel braided lines were that hard to keep in stock. :rolleyes:

If you're ordering now, don't plan on installing any time soon. I've been waiting two weeks for my order.

I never knew a can and two steel braided lines were that hard to keep in stock. :rolleyes:

Was that direct from Billet? Haven't checked the other dealers yet, but guess I should. Still not sure about the brackets though...

Thanks for the heads up!

wink

I'm going to order one tomorrow. Not sure which bracket I should go with however. I ordered a Volant CAI today, so whatever works best with that.

Any suggestions?

wink


The standard bracket that comes with the Jeep can is what I run and would recommend.
http://www.custombilletstore.com/product_p/3018.htm

The standard bracket that comes with the Jeep can is what I run and would recommend.
http://www.custombilletstore.com/product_p/3018.htm

Thanks Dan! Looks simple and clean. Now it appears I've got to find one in stock somewhere. Good news is I just got confirmation my Predator shipped, so things are coming together.

wink

Thanks Dan! Looks simple and clean. Now it appears I've got to find one in stock somewhere. Good news is I just got confirmation my Predator shipped, so things are coming together.

wink

You could check with Billet Tech and see what colors (if any) they have in stock and ready to ship.

It is worth the wait though and they don't charge you until it ships. Great people to deal with over there.

I agree with DC Here it is , it's my engine bay !!!

http://img97.imageshack.us/img97/3558/61l.jpg (http://img97.imageshack.us/i/61l.jpg/)

The standard bracket that comes with the Jeep can is what I run and would recommend.
http://www.custombilletstore.com/product_p/3018.htm

I like that, but wouldn't the blue turbo thingy be in the way on mine?

http://i262.photobucket.com/albums/ii116/mandan007/srt8/014.jpg

I like that, but wouldn't the blue turbo thingy be in the way on mine?

http://i262.photobucket.com/albums/ii116/mandan007/srt8/014.jpg


Yep, I believe that it wouldn't work with your setup.



I toss in some pics of mine with the Titanium finish:
http://www.truckblog.com/gallery/DCSpecial/37456.jpg
http://www.truckblog.com/gallery/DCSpecial/37454.jpg

Blue turbo thingy?:lol: You mean Blow Off Valve?:D

BT threw a post up about a week ago maybe saying they were SLAMMED b/c of a vendor of theirs closing or had a fire or something. They asked people to bare with them. They're trying to fill the orders as fast as they can. They weren't expecting such a large volume of sales from their big sale they had.

Here's the link.....

http://www.cherokeesrt8.com/forums/showthread.php?t=36156&highlight=orders+billet

I think I like the shorter hoses better. No turbo to deal with on mine. Just needs to clear the Volant plumbing. Seems it would be easy to relocate down the road if the need ever arose.

Thanks guys!

wink

Yep.

Direct from BT.

Was that direct from Billet? Haven't checked the other dealers yet, but guess I should. Still not sure about the brackets though...

Thanks for the heads up!

wink

Here (http://www.custombilletstore.com/product_p/3018.htm), get the braided lines, they'll last forever, the basic rubber hoses they use will go bad from the inside out, many here and in the CM forums testified to that result.

We switched to a fuel line well ove a year ago and have zero failures sense then.Thanks

I ran the regular lines for like 2 days and changed to the braided ones. They look better and feel better. Also I bought the brass fittings to cuz it comes with the plastic ones, not a neccesity just made me feel better

We no longer ofer the plastic type fitting.The supplier went out of business.
Brass fittings are included with our catch cans.Thanks

I've been using the orig. lines for about 1.5 years now. No problems...... at least I know of. Maybe I should check them tonight?
You mat have the fuel lines,back then we offered two types.If you have a problem let me know :)

I'm going to order one tomorrow. Not sure which bracket I should go with however. I ordered a Volant CAI today, so whatever works best with that.

Any suggestions?

wink

The Jeep only has one bracket.With the help of some members here it will work with all CAI kits...

If you're ordering now, don't plan on installing any time soon. I've been waiting two weeks for my order.

I never knew a can and two steel braided lines were that hard to keep in stock. :rolleyes:
I put up a post explaining our situation,I also sent out 2500 emails explaining
the situation,I apologize oif you missed the email.But I have a feeling it went to your spam.I assure you we are working as fast as we can.If you ordered color it states directly on your reciept that color may have a lead time up to 20 days.Thanks for your patience.:)

You could check with Billet Tech and see what colors (if any) they have in stock and ready to ship.

It is worth the wait though and they don't charge you until it ships. Great people to deal with over there. I have satin ready ship within 36 hrs
of order placement. Thanks for the kind words I/WE really do try.;)

I like that, but wouldn't the blue turbo thingy be in the way on mine?

http://i262.photobucket.com/albums/ii116/mandan007/srt8/014.jpg

Blue turbo thingy?:lol: You mean Blow Off Valve?:D

BT threw a post up about a week ago maybe saying they were SLAMMED b/c of a vendor of theirs closing or had a fire or something. They asked people to bare with them. They're trying to fill the orders as fast as they can. They weren't expecting such a large volume of sales from their big sale they had.That is coorect.Thanks :)

I think I like the shorter hoses better. No turbo to deal with on mine. Just needs to clear the Volant plumbing. Seems it would be easy to relocate down the road if the need ever arose.

Thanks guys!

wink

No issues with the Volant as far as I know..

The Jeep only has one bracket.With the help of some members here it will work with all CAI kits...

No issues with the Volant as far as I know..



Hmmm... Well I'll assume the last comment means it's as simple as the pictures posted above in this thread. Either way the dealer is installing both, so they'll have to deal with any issues...

Just placed my order. Satin finish with the free hoses.

Thanks!

wink

I've been using the orig. lines for about 1.5 years now. No problems...... at least I know of. Maybe I should check them tonight?

Take off one hose, let it dry overnight and see in the morning if the inside looks smooth or rough, if it's rough, it's going bad from the inside out, let us know.

Hey guys, I have an '07, is it ok to just install the catch can now, or do I need to clean out the intake as well to get the benefit? Thanks.

Hey guys, I have an '07, is it ok to just install the catch can now, or do I need to clean out the intake as well to get the benefit? Thanks.

Better late than never, put the catch can on now, and if the intake is nasty, clean it if it's not too much of a hassle to take out the intake manifold.

I agree with DC Here it is , it's my engine bay !!!

http://img97.imageshack.us/img97/3558/61l.jpg (http://img97.imageshack.us/i/61l.jpg/)

Looks good. Just got mine tonight. Where did you get the nice sleeves on the ends of the braided lines?

Looks good. Just got mine tonight. Where did you get the nice sleeves on the ends of the braided lines?

It comes with the braided lines !!!

It comes with the braided lines !!!

Was afraid of that. Ordered and rec'd the braided lines, no sleeves. Looks like the peeps at Billet will be get'n a call in the morning.

Thanks

Was afraid of that. Ordered and rec'd the braided lines, no sleeves. Looks like the peeps at Billet will be get'n a call in the morning.

Thanks

Don't know what to say !!! I'm sure BT will take care if you .

Don't know what to say !!! I'm sure BT will take care if you .

No worries. Scott at BT e-mailed, apologized and is sending it out.

Hey I noticed they use your pic on their web site...pretty cool.