Anyone know where the best place to go in/near Calgary to get a super charger fitted.

Dale Adams Automotive and Davenport Motorsports in Calgary have both installed S/C on Jeeps.

Craig had his BB exhaust installed at davenport a few months ago, and they had a vortech on the shelf ready to go. They wanted around $8900 installed tho. Shop rate is $85/hr I think- They do good work but its pricey.

a local shop in red deer can beat the pricing of the vortech kit, called davan port as well but the pricing is rediculous

and if your jeep is an 09+ vortech hasnt made a vortech base tune for it yet

a tech at Big 4, is going to put a price together to fit a super charger, it voids the warrenty, but like i told him, i dont care:boohoo:

a tech at Big 4, is going to put a price together to fit a super charger, it voids the warrenty, but like i told him, i dont care:boohoo:

fortunetly for me, my service manager is a good friend of mine and warranty will not be voided :cool:

Sorry I can't help, I thought this was a thread about a Super (Dodge) Charger!

Craig had his BB exhaust installed at davenport a few months ago, and they had a vortech on the shelf ready to go. They wanted around $8900 installed tho. Shop rate is $85/hr I think- They do good work but its pricey.

For sure the unit was was a polished one though, It included a dyno tune as well. But yes a little pricy??

8900 installed with a dynotune sounds not that bad to me... Have to keep that place in mind for spring...

8900 installed not bad????? just so you guys know, mopac in edmonton sell them for 6700 and it takes them about a week to get them in.

Newfie.

$8900 seems very high!

Dude seriously go see Dale at Dale ADAMS shop they are the best in town and have the dyno right there and alot of experience my Harrop done there. DOOONT go to a stealership there morons seriously. My jeep was at Dales along with a 440 being dropped in at same time.:D PS: After install $100.00 says I kick your XXX
http://i45.tinypic.com/35klocg.jpg

Hey Chippy, hows the jeep? If you dont mind id like to take that bet with my jeep this summer?????????? We can meet at castrol????? What do you think?

Newfie.

Newfee for sure I just want to race a Vortech on a 6.1 and Castrol will give better air for sure so your it. Maybe webby come 2? :D

Mine will have a Vortech on it, so you dont need to worry about that :)

Newfie.

Cool Done Deal, see you this summer :D

Hey Chippy, hows the jeep? If you dont mind id like to take that bet with my jeep this summer?????????? We can meet at castrol????? What do you think?

Newfie.

Cool Done Deal, see you this summer :D

Let the games begin!!

When are you guys gonna be at Castrol? I like to be there too!!!
May even have my nitrous on by then.:)

Sometime in may, I think we are going to do another G2G at the track. plus it wont be to hot at that time in the year and might be able to run some good times.

Newfie.

Dude seriously go see Dale at Dale ADAMS shop they are the best in town and have the dyno right there and alot of experience my Harrop done there. DOOONT go to a stealership there morons seriously. My jeep was at Dales along with a 440 being dropped in at same time.:D PS: After install $100.00 says I kick your XXX
http://i45.tinypic.com/35klocg.jpg

X2
Dale was known as a mopar guy, reminds me I need to get my Charger tuned. :)

i'll be at castrol this summer as well, alternating between the jeep and the car.

i wanna line up beside either one of you with my cavalier..... only thing is though, its making 518whp :D

i'll be at castrol this summer as well, alternating between the jeep and the car.

i wanna line up beside either one of you with my cavalier..... only thing is though, its making 518whp :D


Sounds Sick!!! But yeah ill line up with yeah, no worries there.

Newfie.

Sure - $6700 + install is gonna be very close to 8900. Although I talked to Davenport and it's actually $9500+gst and that includes a dialled in CMR (NOT dyno) tune.

Newfie - any ideas where to get the kit installed for a better price?

If this means anything, me and my friend will be doing the install on my jeep

Newfie.

I do have a gearhead buddy - I had just heard that the S/C install is quite tricky... No worries with electrical or anything?

Count me in for a trip up North in May.

I do have a gearhead buddy - I had just heard that the S/C install is quite tricky... No worries with electrical or anything?

The only electrical would be the predator everything else is bolt on, just take your time, if your buddy is a gear head then it should not be much trouble.

Newfie.

I looked at the install manual on the Vortech page - looks scary to me, and looks like a multi-day project. I'm personally leaning towards paying for an install but I'll look at the manual with my buddy when we do the Borla on Friday and get his opinion as to whether or not it's within his skills.

Um. Also. Are we looking at 3-4 blown Jeep's running at Castrol this year??

This should be good!

There should be 3 or 4 supercharged jeeps there, 1 maggy on juice that runs 11.8 a snot colored charger, 3 dodge cummins that should be right around 12-13 flat in the 1/4, and a few other friends that are planning on comming down aswell.

Now if i can get Kokanee13 to spend a little bit of money on his jeep and stop being a cheap A$$, it would be good......................................

Newfie.

Hey Lafngas, Is this your cavalier at castrol last year.

street force, 2003 chev cavalier, 13.485@ 105.74

nope, thats shawns 03 2.2 ecotec turbocharged cavalier

mine is an 02 2.4 twin cam powered cavalier with:

9:1 .020 Overbore Wiseco Pistons
Eagle Rods
Clevite 77 Rod And Main Bearings
2.3 Oil Pump Swap With Modded Oil Pan
Ported And Polished Head
1mm Oversized Valves
Bronze Guides
2.3 HO Valve Springs And Retainers
2.4 Keepers
2.3 W41 Cams Modded For A 2.4
2.4 Intake Cam Tower Modded For 2.3 W41 Cam
2.3 HO Intake Manifold
RSM 62mm Throttle Body
Camaro IAT Screw In Sensor
FTS Turbo Header
Garrett GT35R .82 A/R
44mm Tial Wastegate
1 7/8 Wastegate Dump
3inch Turbo Back Exhaust To An Apexi WS Turbo Muffler
2.5 Bead Rolled And Powdercoated Charge Pipes
Greddy Intercooler 27.5 Long x 11 Tall x 3 Thick Core
HKS SSQV Bov
Autometer Fuel Pressure Gauge
Venom Fuel Rail
Injector Dynamics 1000cc High Imp Injectors
Aluminum Crank Pulley From Apex Modified
RK Sport Upper Engine Mount Insert
RK Sport Lower Engine Mount
Spec Aluminum Flywheel
Bully Stage 4 clutch
Team Green LSD
Team Green MSD Coil Pack Mod
Turbosmart Single Stage Electronic Boost Controller

hoping to hook up and run a high 10 in it

Wow! I will keep my eye out for you at the track.
Hope you get in the 10s.

yeah, id love to run 10's but hooking up is gonna be a little difficult to say the least, fuel pump died on the dyno so i gotta get that fixed and then upgrade to a -8an fuel feed line and get retuned, as it sits it is making 518whp though