Just got back from the track and ran an uncorrected 12.8 at 103:)
See sig for mods

That's very respectable for running in Arizona. What was the track elevation? Did you run at the track just East of Phoenix? I ran there last year and that track is SLOW! :D

Congrats on new PB.

Thanks!
It was at Speedworld which is actually N.W. of Phoenix. You must have run at Firebird Raceway which is East of the city. Both tracks are slow though! Elevation is 1600 FT.
I was also getting 4 degrees of K.R. at times as well. Stu is still working out the tune for me

Nice! What was your time before the cam?

Best of 13.8 uncorrected...... However it was 98 degrees in Phoenix that night

Nice, Ive been looking at the SRT Max. Thinging about their heads too but not sure yet. You should post a vid.....

I will throw up a vid tomorrow.

Next will be a set of SW catless headers

Cool, thanks man.

I got the Kooks with high flow cats

I will throw up a vid tomorrow.

Next will be a set of SW catless headers

:)............

Congrats on the new best.

Waiting for the vid :D

Just got back from the track and ran an uncorrected 12.8 at 103:)
See sig for mods


Forget the ET ......what was your best MPH before that cam. That will tell you if your truly making more power.

congrats on your new best, how do u like you cam?

Congrats on the new PB. I was hoping to get to the track with mine before the end of the season, but that didn't happen. I hope to get out sometime in April when the air is still good.

I trapped at 98 MPH before the cam

I trapped at 98 MPH before the cam

Thats a real good improvemet man! You have any videos of you cam at idle? Did you ever do a before and after Dyno pull?

Nice dude. Your times will continue dropping with more tweaking.

congrats on the new best! That's a great run in AZ.

Any video yet?.....:D

No vid uploaded yet... sorry. I PROMISE I will get it done this weekend. I have been working on data-logging a NASTY surging issue between 1500-3000 RPM under part throttle. Its getting pretty bad, to the point of throwing a P0300 code on a regular basis. Im on my 3rd tune revision, and Im sure Stu will get it worked out...