dfrancom
11-27-2009, 03:02 PM
I need some expert advice on what my next mod should be as I am new to this forum and new to SRT8's. Here is what I have:
2006 Jeep Grand Cherokee SRT8 - Black
Air raid CAI
Eibach Springs
Exhaust
What mod can I do next that will give me the best bang for my buck. Nitrous? or is that not recommended? A chip? What is a Diablo tuner?
I am not sure what my next step should be. Any advice would be greatly appreciated.
Thanks!
dfrancom
11-27-2009, 03:04 PM
Forgot to mention I live in the Phoenix area and I am not sure if there are any decent motorsport shops here...just moved to sunny AZ.
CentralTexHemi
11-27-2009, 03:09 PM
Get a Diablo Tuner and the a custom tune there are several SRT members in your area. I would shop around for nitrous or supercharger since the DA in your area stinks
dfrancom
11-27-2009, 03:15 PM
What do you mean by DA? If I get the Diablo Tuner, do I set the custom tune or does a local shop? I am not an engine guru per se...
Sorry for all the questions....
jim383
11-27-2009, 04:20 PM
What do you mean by DA? If I get the Diablo Tuner, do I set the custom tune or does a local shop? I am not an engine guru per se...
Sorry for all the questions....
As far as tunes go ill try and show you from my jeep on the dyno.
stock tune i put out 342 hp
diablo 91 cai tune i put out 351 hp. the tuner doesnt do anything as far as tuning on the dyno on this tune. you can install this your self.
diablo/ dyno tune i put out 357 hp. the next 2 tunes is where is does his magic on tuning on the dyno.
diablo/cmr dyno tune i put out 368 hp. the cmr hardware is added to the tune and im not really sure how it works. some1 needs to chime in on this lol.
Features: CMR HARDWARE.
Capable of switching between two tunes "on-the-fly"
Never before seen feature of allowing the chip to be turned completely off
Many possibilites such as Nitrous Oxide, Performance/Towing combinations, etc.
Optional LED switch that indicates the state of the chip by changing color.
Ideal for nitrous, race fuel, street and strip
Sleek design installs inside the computer
What Wade means in DA is (Density Altitude)
SAMPLE BELOW.
Based on:
Temp: 75°
Humidity: 48%
Track Altitude: 700 feet
Pressure: 30.09 in.
Density Altitude = 1885 feet
Uncorrected 14.05 @ 101.1
Corrected 13.76 @ 103.22