12.98 104.87 1.80 60ft picked up 22 on the top end. I have 10 runs 13.02-13.04 1.82 60ft's. bought time lol.

Big thanks to DCX tunes for getting me there and working with my tune until I was able to get it. I think I have maybe .1-.15 left in it with my mods. I'm down 1mph from their first tune they sent me. If I can get that 1mph back and the 60ft back into the 1.77-1.79 area I should be able to get a 12.6-7.

Now it is time to start modding.

Congrats!! I have a DCX tune and run 12.8, just got an underdrive so looking for 12.7 now :D

Congrats on the new PB.

12.98 104.87 1.80 60ft picked up 22 on the top end. I have 10 runs 13.02-13.04 1.82 60ft's. bought time lol.

Big thanks to DCX tunes for getting me there and working with my tune until I was able to get it. I think I have maybe .1-.15 left in it with my mods. I'm down 1mph from their first tune they sent me. If I can get that 1mph back and the 60ft back into the 1.77-1.79 area I should be able to get a 12.6-7.

Now it is time to start modding.

Very Nice !!! Congrats on the 12's . You don't need 1.7's 60' to run 12.6-7 , what was you exact 60' numbers ?

Congrats on the new PB and 12's. :)

Congrats !!!

Now we going for 11's? :p

Very Nice !!! Congrats on the 12's . You don't need 1.7's 60' to run 12.6-7 , what was you exact 60' numbers ?

1.80 was the 12 and 1.82-1.83 are the 9 runs 13.02-4's

1.80 was the 12 and 1.82-1.83 are the 9 runs 13.02-4's

Congrats on breaking in the 12's. I am kind of in your boat and have been knocking on the door for 12's but have only manged to get a 13.02 @ 104. How is it that you obtained a 1.82 60 FT? People say to just mash the pedal while in Auto stick mode but that has only gotten me a best 60 ft of 1.889. So when I ran my 13.02 I ran a 1.85 60 ft and that was with revving my Beast to 1500 RPM.

Congrats on breaking in the 12's. I am kind of in your boat and have been knocking on the door for 12's but have only manged to get a 13.02 @ 104. How is it that you obtained a 1.82 60 FT? People say to just mash the pedal while in Auto stick mode but that has only gotten me a best 60 ft of 1.889. So when I ran my 13.02 I ran a 1.85 60 ft and that was with revving my Beast to 1500 RPM.

I don't think 60' has a big impact on breaking 12's check out this 12.9 run a did . And that is holding up to 1800-2000 Lots of Spin . I seam to run better by just hitting it at Idle .

http://img687.imageshack.us/img687/3241/run3.jpg (http://img687.imageshack.us/i/run3.jpg/)

I don't think 60' has a big impact on breaking 12's check out this 12.9 run a did . And that is holding up to 1800-2000 Lots of Spin . I seam to run better by just hitting it at Idle .

http://img687.imageshack.us/img687/3241/run3.jpg (http://img687.imageshack.us/i/run3.jpg/)


Damn Paul! I thought by me getting at least an 1.80 (60 FT.) that then it would put me in the 12's. The most I have ever held it up was up to 1500 RPM on a launch. Launching from idle will only get me a best of 1.889. The thing with your run is that you are making more MPH than I am which will still give you a 12 second slip.

60ft has everything to do with et. .1 60ft is almost .2 off et in the 1/4. your mph is higher so you make more power then me which means it takes less 60ft to get to the same et since youll make it up on the top end with horse power.

Congrats !!!

Now we going for 11's? :p

lol not yet its my dd. ill be happy with mid 12s and add a superchargewr or turbo later

Congrats on your new times bro!!!!

60ft has everything to do with et. .1 60ft is almost .2 off et in the 1/4. your mph is higher so you make more power then me which means it takes less 60ft to get to the same et since youll make it up on the top end with horse power.

You got a point there !!!