Thats right guys, if you want instant torque and amazing HP, we have a system for you! We are looking for a few brave individuals to step up to the next level and have a custom Kenne Bell superchager installed.

Talk about RARE! This system will be one of very few we will create for the US. :clap:

Your choice of 8-20PSI!
Your choice of colors: Polished, black or anything you like!
Fully installed at our nearly 40,000 square foot facility
Custom Dyno and Road tuned by DCX Depot

The unit sounds and looks awesome!

Power and torque is instant!


Here is one we custom fabbed for a Dodge Charger SRT8
She has a PPP426 longblock and current on the low boost set up. In the coming week, we will install our new billet fuel hat with 3 pumps, new lines, fuel pressure regulats and re-tune for 18+PSI and hige power!

At 10ish PSI it made 640whp / 665 ftlbs in a VERY safe setup.


This car also has a Paramount Performance built transmission and Performance valvebody, our loaded rear end with 3.23 gears (stock is 3.07) and a host of other goodies.

If you have any questions regarding performance products, please feel free to send me a PM or call.

http://dcxdepot.com/images/kennebellhemi1.jpg

http://dcxdepot.com/images/kennebellhemi4%20(3).jpg

http://dcxdepot.com/images/kennebellhemi5%20(4).jpg

http://dcxdepot.com/images/kennebellhemi6%20(5).jpg

http://dcxdepot.com/images/kennebellhemi7%20(6).jpg

http://dcxdepot.com/images/kennebellhemi8%20(11).jpg

http://dcxdepot.com/images/kennebellhemi9%20(13).jpg

http://dcxdepot.com/images/kennebellhemi3%20(2).jpg

http://modulardepot.com/warnerkb.jpg


For serious inquires, please send me a PM or call.

Thanks guys,

Tim C

Sounds really cool, right up to the part where you don't give a ballpark price.

T

Sounds really cool, right up to the part where you don't give a ballpark price.

T

LOL!

Sorry, Well since this is the first one I cannot give you an accurate price.

Ballpark with polished superchager, intercooled, installation and dyno/road tune, figure "around" $10K. Could be alittle higher or lower.


Thanks,

Tim C

Thanks!

T

$10K is in the ballpark for sure, for a fully installed and tuned KB kit, I spent around $7K five years ago for my cobra ICO kit (installed it myself and paid for an accurate tune) - any low volume kit will cost more than say a kit for a car with a factory supercharger (i.e. 03-04 cobras). I was the 1st ICO kit for a 99 cobra and the growing/learning curve was substantial. Just having it dialed in making it "drivable" is worth its weight in gold. Too bad I cant quite spring for it now for my daily driver Jeep! May be a good deal for someone - and KB is the best quality with no corners cut

Videos or ban:D:D

I have videos, just have to get them edited and loaded on Youtube.

I will try tomorrow.

Thanks,

Tim C

I have videos, just have to get them edited and loaded on Youtube.

I will try tomorrow.

Thanks,

Tim C

Ok cool ;)

way too expensive for the total package. Had a supercharger put on my mustang gt 2008 in 2008 and it cost me $7500 total with a hurst short throw shifter as well.

way too expensive for the total package. Had a supercharger put on my mustang gt 2008 in 2008 and it cost me $7500 total with a hurst short throw shifter as well.

this is a thread about custom installing a KB kit that that is designed for a Challenger correct?...so being that everything is more expensive for mopar to begin with and adding to that that this is a CUSTOM install id say a ballpark estimate of 10k is pretty reasonable...u hafta pay to play and you hafta really pay if you wanna say you were the first mofo with a KB on a Jeep SRT8.

the design for the KB is almost identical. paying to play is a fact of life. I thought someone already did this mod?

Not that im aware of, at least not a KB unit. I could be wrong though.