|
: Purchased Silver GC SRT8 tonight - one complaint dallastx 03-03-2007, 09:43 PM Picked up an 07 silver GC SRT 8 after looking at these for nearly a year. One complaint - The license plate adapter was already screwed into the front bumper - Removed the adapter and have three nasty looking holes where you usually have three dimples - Any Ideas on how to disguise or repair these short of the body shop? Otherwise I love the truck and I think my wife loves it more. Thank you DT palo alto dave 03-03-2007, 09:56 PM Thats to bad...................... find some small round botton head allen bolts, screw in part way, paint, and tighten when paint is dry. This is what I've done in the past and it looks ok or at least better than the holes.......... Se7en 03-03-2007, 10:02 PM Congrats on your Jeep! dallastx 03-03-2007, 10:29 PM Thank you Se7en! Street WK 03-03-2007, 10:33 PM They make colored things that plug into those holes. kramsay1234 03-03-2007, 10:42 PM Don't have any advice since we have to have front plate up here. But enjoy the new truck. ________ Xxx Amateur Tube (http://www.****tube.com/) whipple1 03-03-2007, 11:18 PM Picked up an 07 silver GC SRT 8 after looking at these for nearly a year. One complaint - The license plate adapter was already screwed into the front bumper - Removed the adapter and have three nasty looking holes where you usually have three dimples - Any Ideas on how to disguise or repair these short of the body shop? Otherwise I love the truck and I think my wife loves it more. Thank you DT Hey Dallas good luck on your new ride,I ordered mine so I told the dealer not to install the front plate,anyway try to get a flat plastic push pin from the help section in a parts store(pep boys etc.)something thats close to the hole size sand the front smooth and use spray paint for plastic bright silver I think Krylon fusion is for plastic or you can try a automotive paint supply for exact colors,it might be worth a try good luck. MOTV8D 03-04-2007, 03:11 AM I had the same issue. Go to bumperplugs.com and they sell plugs that do a great job of filling those holes in. Also the paint code for silver is WSB. dallastx 03-04-2007, 06:34 AM Thank you for the good suggestions! shodanusmc 03-04-2007, 09:04 AM I would suggest a nice Marine Corps sticker to cover the holes. Have fun with your Jeep. TheDon 03-04-2007, 09:47 AM see if these folks can help you, as they have solved some problems for me before: http://www.bumperplugs.com/ | ||