I'm trying to make a list so I can get everything ordered

What needs replaced and what can be reused? Part numbers would help.

Crap, I erased the list I was making when I tried to copy and paste it :mad:

Well I guess I'll help answer part of my own question :rolleyes:

Intake Manifold Gaskets 5037503AA x2

Timing Cover Gasket 5139933AB

Crank Seal 53021585AD

Oil Pan Gasket (aka Windage Tray) 5037692AA

D-Port Exhaust Manifold (Header) Gasket Set 05038098AA & 99AA

Crank Bolt 6506340AA

Cam bolt 6507480AA

6.1L Head Gasket (2)- 5037 592AA

6.1L Head to block bolt primary (20) - 6506 694AA

6.1L Head to block bolt secondary (10) - 6506 334AA

It just depends on what you mean by motor swap. I'd assume you meant you had a new motor ready to go in and well then you would not need any gaskets. If you are talking about rebuilding yours thats a whole nother question and that would not be a motor swap. Soo what exactly are you doing?

Short block, heads, cam, ported intake..........

So transferring everything from the old motor, I just hear that some gaskets can be reused and some cannot, same with some bolts

Do yourself a favor and get all new gaskets and bolts, dont reuse anything.

You cant reuse the head bolts the others you may but why would you, get them all new and save the headache.

Intake Manifold Gaskets 5037503AA x2----should be O-ringed and reusable

Timing Cover Gasket 5139933AB----should be reusableif taken off carefully

Crank Seal 53021585AD----dont see a need to replace this and should already be installed on a short block

Oil Pan Gasket (aka Windage Tray) 5037692AA----not too sure but may be reusable

D-Port Exhaust Manifold (Header) Gasket Set 05038098AA & 99AA----replace

Crank Bolt 6506340AA----replace

Cam bolt 6507480AA----replace

6.1L Head Gasket (2)- 5037 592AA----replace

6.1L Head to block bolt primary (20) - 6506 694AA----replace

6.1L Head to block bolt secondary (10) - 6506 334AA----replace

Give Andy at PPP a call, they have an install kit that will include all the needed bolts and gaskets.
Good luck with the install.