This is going in a 09 Challenger SRT-8. This is a 8L Whipple with a Arrington 440 and SHR NAG1-HTCr transmission!

Check it out!


http://i246.photobucket.com/albums/gg92/southernhotrod/8l_whipple.jpg

hmmm, hope that block will hold up. ;)
....p.s. that thing is huge!!! lol

looks R-I-D-I-C-U-L-O-U-S

OMG that's huge

:eek::eek:
I dont know what to say... that is incredible
Id love to see that on the road....or even better, on a Jeep on the road :D

Thanks SHR!

ong that is hot.

WOW! That is a big blower. That is going to put down some big numbers and times if there is any possibility of traction.

I know there's a lot of dudes here right now........... is it wierd to rub one off anyway? LOL!

++++++ 1 on what everyone else saiddd :pinklove:

Thats sick Eddie, awesome job. Only in Louisianna.

Damn Eddie thats huge for a car. My buddies 50' Outerlimits cat has twin 8.3L whipples on it but the motors are like 600ci.

http://www.offshoreonly.com/forums/attachments/outerlimits/363640d1223488253-golddigger-dsc00594-20-28large-29.jpg

We went with the 8.3L so that we could spin the blower slower.

Thats awesome, I guess you are going to cut a massive hole in the hood for this one?:D

Thats awesome, I guess you are going to cut a massive hole in the hood for this one?:D

Yep! It will have a bug catcher too!

Man iam deffinatley goin to make a trip down there soon iam missing everything.good luck with the build.

thats sick man ..

Eddie, are you planning to market your own line of Southern HotRod hoods that have big gaping holes in them? LOL

Thats awesome.

Eddie, are you planning to market your own line of Southern HotRod hoods that have big gaping holes in them? LOL

Thats awesome.

Good idea! LOL! :D

All I can say is I want one. :)

so sick, can't wait to hear it rumble, another gem SHR, nice handiwork Eddie :D

Eddie if I ever buy another LX/LY I'm coming to see ya.

No way will ANYONE's transmission hold up to a 8L whipple on top of a 440.
Certainly you will find the limits of the Hemi block, i'm thinking in excess of 1500 hp with that setup, assuming you strap a belt-sander cogged pulley to it.

Eddie if I ever buy another LX/LY I'm coming to see ya.

No way will ANYONE's transmission hold up to a 8L whipple on top of a 440.
Certainly you will find the limits of the Hemi block, i'm thinking in excess of 1500 hp with that setup, assuming you strap a belt-sander cogged pulley to it.

You underestimate the power of the SHR tranny! LOL I'm beating the piss out of mine and even though I'm not making 1500hp (only a few pounds away lol) it's begging for more. :D

i thought the biggest whipple was a 5 liter.

i thought the biggest whipple was a 5 liter.


http://www.whipplesuperchargers.com/product.asp?ProdID=1162

Here ya go W510AX and W510R

With all the big blowers and long tubes coming out of SHR, I'm starting to think someone is over compensating....:D

You plan on intercooling any of these blowers?

J

Yes, another boring cookie cutter offering from SHR.

The line up with the Maistro, your Hillborn and that Whipple would be a sick photo. And maybe a Jeep, with, uhh.. something...:up_to_something:

You cutting a hole in the hood?

You cutting a hole in the hood?

yes, it will be a similiar set up to maistros.only on a chally!..alot of folks praised maistros build but said they would love to see it on a chally,well ask and you shall recieve!...only they kicked it up a couple of notches!!:D

Eddie, What happens to the bugs that these thing eat up ? Im mean you cajuns have sum huge freaken bugs, sometimes the size of small birds:D Are the rotors different on these bigger blowers or are they more advanced than the standard Eatons ? I recall reading about the teflon pitting on the eaton rotors, this was on guy who were spraying ? I think these builds you are doing are freakin sick, if anything they def have bling

Holy crap. I don't even know what to say at this point......

With all the big blowers and long tubes coming out of SHR, I'm starting to think someone is over compensating....:D

J

LMAO now thats funny :rofl:

Never a dull moment a Eddie's place....

Must have something to do with that first name? :satan:

http://www.whipplesuperchargers.com/product.asp?ProdID=1162

Here ya go W510AX and W510R

thanks alot i never new they made it so big

You plan on intercooling any of these blowers?

J

Looks like a yes! Holy moly....:jawdrop:

Hooked up to the full pedders, this one is starting to come together.

hrm, there *was* an orange chally around the block from my house.. but its been gone for a few days.

Wonder if it will have a big hole when it returns :) lol

hrm, there *was* an orange chally around the block from my house.. but its been gone for a few days.

Wonder if it will have a big hole when it returns :) lol

Depends on where it goes while its gone....;)

DAMNNNN that is by far the sickest modern hemi build I have seen yet. This thing should make an honest 1000+whp no doubt. When will it be complete?

heres some with the beautiful Kooks Stepped Headers with Egt Bungs for each cylinder!..also threw in a pic of the huge stop tech brakes!

WOW....this is insane!...GL with the install and cant wait to see the numbers its going to throw down!

This is insane, thank god someone bumped this lol, I dont know what I woulda done if I missed this one. How much for this project, so I guess I'll answer my own question here.

09 Chally = $40k
440 Arrington LB = $10k
Rest of Motor = $8k (random guess, prob about right)
8L Whipple = $8k (not sure???)
SHR Tranny = $5k (not sure here, feel free to answer these)
Kooks LT Headers = $2k
Stop Tech BB Kit = $4k (ballpark?)
Those Rims = $4k (ballpark?)

Total Project = $80k+ (unless there was other stuff not mentioned, which Im sure there was haha) VERY GOOD VALUE imo.

Great looks/brand quality for most part
AMAZING PERFORMANCE IM SURE (1000hp+/insane braking/good handling/aerodynamic other than the bug catcher haha)

*I don't see what else can match this, straight-line nothing will be able to match the quality and performance but there will always be those guys who get $8k Camaro's and drop $50k in it and go 7 seconds, so you know, pointless battle there. GREAT JOB SHR! Gonna be one helluva car, cant wait

Looks like a yes! Holy moly....:jawdrop:

Hooked up to the full pedders, this one is starting to come together.

Sorry if this is a noob question but what are pedders, was that meant to be headers? Also what are Kooks Stepped Headers, what does the stepped part mean? Thx

Sorry if this is a noob question but what are pedders, was that meant to be headers? Also what are Kooks Stepped Headers, what does the stepped part mean? Thx

Pedders is a suspension company.

Stepped headers are just that... The primary tubes step from 1-7/8" to 2".

Ahh ic thanks, makes sense:D

Whats up with the build? Maybe I missed it?

T