K, I got my front window replaced ( cracked ) now am i just crazy or do all of our window/rain sensors look like this ? - especially that little camera like thing pointed to with the arrow :D

http://img152.imageshack.us/img152/5967/65699647nk2.jpg (http://imageshack.us)

Mine doesn't look like that, but mine is an 07. Mine is like the front of a radar detector which is a smoked plastic.

Mine looks a lot like that but no matter what angle I look at it, I can barely see the thing you are pointing to. Your's is much more visible; or it could just be the photo.

The other thing is that your 'camera' portion looks offset and mine looks like it is in the middle. I have an '07.

Yea, thats the thing I dont think that the '08's even look like that but i'm not sure. I'm pretty sure all the years are the same looking but if someone with an '08 could verify than i can call and ***** at the dealer.

Just checked.. my '08 looks exactly like that. What is the red square flush against the windshield?

-Rock

The windshield needs to be ordered with a rain sensor "cut-out" in the tint. Mine is a 2007 also. And it has been replaced at least 3 times:o

Maybe one of you '08'rs can take a pic for me. I took a chance and ordered a mopar oem windshield with the tint on the top ( they do exist ) and I have black cutout but because the tint runs directly on the bottom of it i have a flush black line. So I can't tell if its just trick of the eye now with the tint or something else...Heres another pic with the cut out in the red lines...

http://img522.imageshack.us/img522/1306/11450337vl7.jpg (http://imageshack.us)
][/URL]

Never mind guys, thats the way it was before ( looked up pics from before cracked windshield ) it just looks differently now that i have the nice couple inches of top tint :)

http://img392.imageshack.us/img392/9058/tcaseoil003ql3.jpghttp://img183.imageshack.us/img183/2973/tcaseoil006uy2.jpg (http://imageshack.us)

Doesn't look quite right for some reason. Is there that bumpy stuff up at the top?

^ yep, you can see it from the inside. Its barely visible from the outside, the red diagnol lines i drew are where the bumpy cutout is on the inside.

^ yep, you can see it from the inside. Its barely visible from the outside, the red diagnol lines i drew are where the bumpy cutout is on the inside.

THE TINT IS SUPPOSED TO COME DOWN AND BOX OFF AROUND THE MIRROR AND SENSOR

^ It Is. I Got A Mopar Windshield That Comes With A factory Tint Strip. This Factory Tint Strip Runs Along The Exact Width As The Cut Out.

^ It Is. I Got A Mopar Windshield That Comes With A factory Tint Strip. This Factory Tint Strip Runs Along The Exact Width As The Cut Out.

BUT IT IS SUPPOSED TO COME DOWN AND BOX AROUND IT.HARD TO SEE MY WINDSHIELD IS TINTED TO THAT BOX BUT YOU CAN SEE THE LINE
http://i245.photobucket.com/albums/gg59/BILLSHOE179/HIDCOVERS.jpg
http://i245.photobucket.com/albums/gg59/BILLSHOE179/Frontcovers.jpg

^ yes it does come around and box it, but you cant see that from the outside because of the tint strip. Here maybe this pic will show better what i am saying..

My old oem windshield
http://img381.imageshack.us/img381/747/winie4.jpg (http://imageshack.us)

My new windshield with factory tint strip

http://img381.imageshack.us/img381/winie4.jpg/1/w725.png (http://g.imageshack.us/img381/winie4.jpg/1/)

^ yes it does come around and box it, but you cant see that from the outside because of the tint strip. Here maybe this pic will show better what i am saying..

My old oem windshield
http://img381.imageshack.us/img381/747/winie4.jpg (http://imageshack.us)

My new windshield with factory tint strip

http://img381.imageshack.us/img381/winie4.jpg/1/w725.png (http://g.imageshack.us/img381/winie4.jpg/1/)

NOW LOOK AT MINE IT GOES DOWN AND AROUND BOX. LOOK HOW CLEAR IS AROUND WHERE THEY STOPPED TINT AROUND SENSOR

bill u tinted the front windshield.

bill u tinted the front windshield.

YES VINNY I DO IT TO ALL MY CARS HATE THE SUN BURNING THE INTERIOR

Yea did you tint your front windshield ? I'm talking about a mopar windshield with the tint strip in the glass. Not a plastic tint but actually produced tint out of the factory like our rear hatch window.

YES VINNY I DO IT TO ALL MY CARS HATE THE SUN BURNING THE INTERIOR

is it really dark does the cops break ur chops about it. could the tint get mest up when u scrape the reg and inspection sticker off. it looks really good.

Yea did you tint your front windshield ? I'm talking about a mopar windshield with the tint strip in the glass. Not a plastic tint but actually produced tint out of the factory like our rear hatch window.

YES I HAD IT TINTED. I THINK THE WINDSHIELD TINT GOES LOWER TO COVER THE SENSORS ITS LIKE A RUFF SURFACE WHICH IT DARKENS WHERE MY GUY TINTED UP TO

YES VINNY I DO IT TO ALL MY CARS HATE THE SUN BURNING THE INTERIOR

Have mine tinted too, I love it!

is it really dark does the cops break ur chops about it. could the tint get mest up when u scrape the reg and inspection sticker off. it looks really good.

I SOAK THE SH!T OUT OF THE STICKERS WITH WATER SO THEY DONT REALLY STICK TO TINT AND EASY TO GET OFF. I HAD ONE TUNNEL COP BREAK MY BALLS ABOUT TINT BUT STOPPED ME FOR NO FRONT PLATE BUT LET ME GO ANYWAY.

^ my tint is in the glass. It blends in with the rough surface where the mirror attaches...I suppose i'll have to take more pics tonight otherwise we'll debate untill morning

^ my tint is in the glass. It blends in with the rough surface where the mirror attaches...I suppose i'll have to take more pics tonight otherwise we'll debate untill morning

NO I GOT YOU BUT MINE NEVER SHOWED THRU LIKE THAT BUT IT IS AN 07 :confused:

^ i'm pretty sure its the lighting throwing an optical illusion. I'll have to take a pic later in my garage. Also to show the winshield as an option to people that want a factory windshield replacement with an oem tint strip. It should help those 2-3 inches on top always get me with the full glare of the sun

^ i'm pretty sure its the lighting throwing an optical illusion. I'll have to take a pic later in my garage. Also to show the winshield as an option to people that want a factory windshield replacement with an oem tint strip. It should help those 2-3 inches on top always get me with the full glare of the sun

YES DIFFINETLY WORTH GETTING WITH BUILT IN TINT STRIP. MAYBE MINE IS DARK TO CAUSE NO LIGHT GETTING INSIDE.

here ya go bill..

http://img145.imageshack.us/img145/9436/dsc00572ci6.jpg

http://img510.imageshack.us/img510/3712/dsc00573di1.jpg

http://img509.imageshack.us/img509/1559/dsc00575zv7.jpg

Yea I see it now. Weird how it doesn't show from outside. Like you said probably to much light