Hey guys, as most of you know, I've been out of town for a few months, but I will be home in late November. I'll be home until mid January.

With christmas coming up, I'm sure some of my DIY SRT neighbors will need somewhere to install their new mods. It will be cold, and wet outside, etc.

So, I'm throwing this out there to you guys:
I own a tire/muffler shop. While I'm home, if anyone needs to use my place to install stuff, we can do it after hours there. We have a lift that is great for installing aftermarket exhausts, welding up new mufflers, lube service, and whever else. We also have a new tire machine. The balancer is old and beatup but it works. There is also lots of floor space for spring installation/brakes/CAI/etc.

The shop usage will be free, I'll hangout and help for free.
This is just a chance to help out fellow SRT owners and meet people from the forum.

The shop is located about 1hr45min south of Dallas, 1hr north of Waco, and 2 hours north of Austin.
Hico, TX 76457

note: This service only applies to the SRT you own. I'm not reponsible for broken stuff, vehicle damage while in the shop, or any enjury you would incure while working in my shop. It is just a casual get-together, not a business transaction. Also, we are closed on sunday so if the project will take longer than a few ours we will set it up to do then. I can't have a buddies car tieing up shop space during business hours.

Just send me a PM, and we can set something up.
I wanna meet ya'll and see your rides, and help out were I can.

-Skye
www.candhonline.com (more pics here)
http://i236.photobucket.com/albums/ff169/skyehighperf/dscn3133.jpg
http://i236.photobucket.com/albums/ff169/skyehighperf/DSCN3136.jpg

That is ****ing cool man. Very nice of you to help out your fellow owner like this. Thank you for your generocity.

Joe, if you wanna drive down from NY, you can use the shop too...LOL

Joe, if you wanna drive down from NY, you can use the shop too...LOL

I got nothing to install. LOL

That is cool it would be nice to help fellow srt owners.

Thats a good look. How far is the drive from Bklyn. lol

Thats a good look. How far is the drive from Bklyn. lol

New SRT mod..$300
Gas to shop to install and back....$1600
60 hours behind the wheel of your GCSRT8....priceless.

New SRT mod..$300
Gas to shop to install and back....$1600
60 hours behind the wheel of your GCSRT8....priceless.

Dont forget Bail for doin 150 in a 75...

It would have been so much cooler if I would have added that one..dang!

It would have been so much cooler if I would have added that one..dang!

Ok i'll Revamp it for you

BWoody Spings $329
Bwoody 4" CAI powdercoated E-Blue $344.99
Kooks Headers/High Flow Cat $1700
LED Tails Tinted by Daniel $250
Gas to shop to install and back....$1600
Bail for doin 150 in a 75 $500
Lawyer and Court Fees $3000
60 hours behind the wheel of your GCSRT8....priceless.

there ya go!

Without mapquestin, how far are you from Houston?
Very nice of you to offer the shop.
JT

houston is a little far, like 6 hours.
you are more than welcome though.

Hey Sky,,,Maybe that hood project we talked about!

GC

Hey Sky,,,Maybe that hood project we talked about!

GC

Hood project????? Ok spill it guys.

Hey Sky,,,Maybe that hood project we talked about!

GC

That sounds great. I just need to buy a tig welder...sounds like a good excuse.

BTW, all the metal fabrication equipment is in my personal shop. We can do it there. We need to find a donor hood in a junkyard or something to experiment with.

Let's do this for real!

Hood project????? Ok spill it guys.

I don't want to say anything until something comes out of it.

I don't want to say anything until something comes out of it.

I think I know already. I was lookin for a hood also. Gonna see if my friends shop can make some changes to it for me.

I think I know already. I was lookin for a hood also. Gonna see if my friends shop can make some changes to it for me.

That's cool, we are hopefully going th fabricate somthing.

how s!ck man! thats great! and you have a rack!!! i'm fu<kin' drooling!!!!!!!

WOW This is awesome Skye...why cant you relocate closer to NY?....that would be sooo much better!
But seriously, thats awesome of you..way to help out your SRT brethren

That sounds great. I just need to buy a tig welder...sounds like a good excuse.

BTW, all the metal fabrication equipment is in my personal shop. We can do it there. We need to find a donor hood in a junkyard or something to experiment with.

Let's do this for real!

I'm in the process of checking on hoods now!..They make a replacement steel hood..a lot cheaper than aluminum..I have a line on a donor Pontiac ****(secret)hood with vents..expensive though,but they are steel..my experience is in steel fab. I have a wire feed with gas and can but weld or spot/stitch,which I can use .. Your english wheel and other stuff could come in handy! I will check with you later!

GC

yeah SKye and when ur done relocating to NY how about relocating out here to Cali - the weather is awesome and the girls are HOT!!! :D

i wish i had a rack.....to put the Beast on.....not just my girl's to put my :eek: on

o my


nice garage man - i'm so jealous...i hope you guys have a blast and post some pics please so we can live vicariously through ya!