Has anyone in here bought this and hooked it up to their beasts? If so was it a hard mod to do?

http://www.wkjeeps.com/iPod.htm

Thanks.

(Hey the link is up top,not bouncing around :D )

I have, it's easy. Disconnect your battery, remove the radio bezel, remove your radio, center splice three wires into the harness (solder & tape).

Run the cable to the inside of the glovebox, drill a 1" hole inside the glove box to mount the bulkhead adapter, plug the iPod cable in, re-install the radio/bezel, re-connect your battery, connect to your iPod, tune your radio to 87.9 and listen. Done!

I did not mount my bulkhead adapter in the glovebox, I have yet to mount to to determine where I want it.

The picture on the wkjeeps.com site is for Jeep's that do not use the CAN-BUS system as our WK's do, so installation is a little different but not rocket science!

How do you like the sound with this installed? Does the ipod play loud enough through the car stereo?

It's fine. I have the REC NAC; my only complaint is... I have the 80GB iPod with the hard disk drive. When the drive spins up, you can hear it over the speakers. They need to sheild the cable better.

I will experiment with some torroid chokes to see if it resolves the issue.

To navigate your songs, you still do it all on the iPod.

where did you buy and how much did you pay if you don't mind sharing that info?