|
Texas_A_M_Fan 10-19-2006, 04:25 AM I purchased some pollished door lock pins on ebay, and they look great. Only problem is the removal of the stock pins! I was under the impression that they just screwed on and off. If that is the case, they require a ton of torque to get them moving. So much so that I stoped in fear of breaking something. Anyone have any advice? teda 10-19-2006, 05:05 AM I purchased some pollished door lock pins on ebay, and they look great. Only problem is the removal of the stock pins! I was under the impression that they just screwed on and off. If that is the case, they require a ton of torque to get them moving. So much so that I stoped in fear of breaking something. Anyone have any advice? Might have to get the "Flexerator" to come over and unscrew them...Seriously though, they do unscrew, just extremely difficult. I took mine off to cut off some on the bottom so they dropped down to level when locked. Just go for it. Texas_A_M_Fan 10-19-2006, 07:52 AM Well....tried again, without the fear of breaking something, and all went well. SI_G35Coupe 10-19-2006, 09:22 AM do you have pics and/or link to the door pins you bought on ebay? | ||