:D

Victory is mine. Actually a pretty simple mod thanks to MrHemi's very clear directions. Took me about an hour to complete just because I wanted to be very precise with my connections and whatnot.

I know I know we want pictures but Im home for spring break and left the camera at school. Ill post some along with other new mods eventually.

For sure maybe my best mod yet other than the Bwoody. Also got around to de-badging this morning. Makes for a much cleaner looking ride now with no Jeep letters and the working Fogs. IM PUMPED:cheers:

anyone got the link to this? I want to wire mine up this weekend. Where is candyman when you need him.

.http://www.cherokeesrt8.com/forums/showthread.php?t=6704

Here are the actual directions from MrHemi...........

http://www.cherokeesrt8.com/forums/showpost.php?p=7879&postcount=8

Thanks guys. Gonna give this a shot tomorrow.

:D

Victory is mine. Actually a pretty simple mod thanks to MrHemi's very clear directions. Took me about an hour to complete just because I wanted to be very precise with my connections and whatnot.

I know I know we want pictures but Im home for spring break and left the camera at school. Ill post some along with other new mods eventually.

For sure maybe my best mod yet other than the Bwoody. Also got around to de-badging this morning. Makes for a much cleaner looking ride now with no Jeep letters and the working Fogs. IM PUMPED:cheers:
nice! moving along with the mods:D
Thanks guys. Gonna give this a shot tomorrow.

you can do it godfather!

hmm. followed directions, the parking lights function fine if hooked up. I cant get the R or L turn signal/brake to light up. Swapped relays to fill the empty ones and still no luck...hmmm

08-07-2007, 02:15 AM
TXBLU
Supporting Vendor Join Date: Jul 2006
Location: Irving, TX
Posts: 212

Currently I have plug & play wiring harnesses that convert the non-functional rear bumper fog lights into running/brake/turn signal lights. Requires ZERO cutting of the existing wiring. Includes bracket for 4-pin and 7-pin trailer wiring connectors and installation instructions. Price is $125.00 shipped to anywhere in the U.S.....................http://www.cherokeesrt8.com/forums/showthread.php?t=6704

Hey, I have tried three times to contact you about how to order one for my 06.

Help please.

Hey, I have tried three times to contact you about how to order one for my 06.

Help please.


TXBLU
Supporting Vendor
Last Activity: 01-03-2008 04:54 PM

I did not have to do this with my 2006.

I had one missing relay that was all.

Hey!!!

I finally got around to my rear lights. I was using my friends lift to change out my F & R diff, transfer fluids since I hit 30k miles and decided to tackle the lights as well. The entire fluid change & lights took me 2 hours taking my time.

The lights were a piece of cake and only cost $5 for the plug for trailer hookup and my time. It's universal so the green wire is for the right light, yellow is for the left light, white is ground and tape off the brown. All you do is run the green to the the wire on right thats green/red stripe then run yellow to left light same color wire green/red strip and just run the white to the left black wire from the bulb since boths sides use the same common ground in the loom and you're all done. I only had to extend the wire that goes to the right side since the other 2 were close enough. They work awesome!!! Extra brake & blinkers. I should have done that a long time ago.............


Paul:cool: