Lifetime Premium Member
Join Date: Dec 2008
Thanked 36 Times in 25 Posts
End of story. I hooked up my laptop to the lc1 to see what was going on after numerous other experiments. The lcd light was not working correctly. When plugged into the computer I could see what was happening. It did its open air calibration and all was good. With it hooked it up I did some recording, along with some dataloggin on the trinity. At WOT I am seeing 12.1/12.2, crusing and ideling 14.5/6. Looks pretty good as of now. This is with the 91 canned tune. I will try it stock, 91, then 93 hopefully tommorrow and then send johan some logs. Diablo is working on getting the trinity to be able to read a/f mixtures as we speak so hopefully soon I can moniter it through the trinity instead of my computer.
If I would of hooked up the computer immediately after my initial install I would of saved about 10 hours and alot of stress!!!!
I will take a pic of the wire I spliced into for the 12 volt power, so it will save the future installers some time. Also I went through the floor panel instead of the firewall. I will include that pic also.