WK1 Program keys DIY - Cherokee SRT8 Forum
Tech Tips - DIY - How-To Member created and Member approved! From modifications to maintenance, find the step-by-step info you need here. (Only Moderators can post)

  • 1 Post By MeanHemiSRT
LinkBack Thread Tools Display Modes
post #1 of 1 (permalink) Old 11-23-2013, 06:40 AM Thread Starter
Major Contributing Member
MeanHemiSRT's Avatar
Join Date: Feb 2013
Location: North Jersey
Posts: 1,878
Thanks: 151
Thanked 299 Times in 259 Posts
WK1 Program keys DIY

1 ). Insert one of the preprogrammed keys into the ignition cylinder of the Jeep Grand Cherokee. Turn the key to start the vehicle for three to five seconds before turning it off. Remove the preprogrammed key from the ignition cylinder.

2 ). Insert the other preprogrammed key into the Jeep Grand Cherokee's ignition cylinder. Turn the ignition to the "On" position, listen for a chime to sound and watch for the vehicle's lights to flash. When you hear the confirmation chime and see the lights flash, turn the preprogrammed key to the "Off" position and remove it from the ignition cylinder.

3 ). Insert a new, unprogrammed key into the ignition cylinder of your Jeep Grand Cherokee. Turn the ignition to start your vehicle within one minute of inserting the key in the ignition cylinder. Listen for the confirmation chime and watch for the vehicle's lights to flash. Turn the key to the "On" position again and wait three seconds before turning off the ignition and removing the newly programmed key from the ignition cylinder.
TX-SRT likes this.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

2008 SRT8 Brilliant Black/ Volant intake/Modern Muscle 87mm TB/180 Tstat/ Borla S/Toooned/ BT Catch Can,SS braided lines/ 6000k Hids / Black Alcoas/ 275.315 NT05/ bwoody 1.3 springs/ Stage 6 shocks/bwoody endlinks/ 15% tint/ led tail lights/ full led interior/ exterior trim color matched/ carbon fiber spoiler/ carbon fiber half covers.
MeanHemiSRT is offline  
The Following 2 Users Say Thank You to MeanHemiSRT For This Useful Post:
HoustonJGCSRT8 (11-23-2013), JeepFreak12 (11-27-2013)
Sponsored Links
Closed Thread

Quick Reply

Register Now

In order to be able to post messages on the Cherokee SRT8 Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode

Similar Threads
Thread Thread Starter Forum Replies Last Post
DIY: Spare tire setup (WK1) Jasonlmarsh Tech Tips - DIY - How-To 0 11-06-2013 12:16 PM
DIY: Install a WK1 Fore Fuel System LAFNGA5 Tech Tips - DIY - How-To 0 07-09-2013 04:16 PM
DIY: WK1 LC-1 to Trinity Install Mikla Tech Tips - DIY - How-To 0 04-27-2013 06:45 PM
How To: WK1 DIY Spring swap gspfunk Tech Tips - DIY - How-To 0 10-08-2012 12:12 AM
DIY (WK1): A/C & Heater Actuator Gear SRT8Girl12 Tech Tips - DIY - How-To 0 06-06-2012 10:03 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

For the best viewing experience please update your browser to Google Chrome