blown and wastegated - Cherokee SRT8 Forum
Reply
 
LinkBack Thread Tools Display Modes
post #1 of 403 (permalink) Old 01-20-2013, 09:25 PM Thread Starter
Lifetime Premium Member
 
nyjoed's Avatar
 
Join Date: Nov 2009
Location: Westchester, N.Y.
Posts: 5,201
Thanks: 418
Thanked 388 Times in 278 Posts
Send a message via Yahoo to nyjoed
blown and wastegated

soo ive been excited and been trying to wait until i got my blower but seeing as the balance will be paid the end of this comming week id figure id just post now. finally after the past 3 years with my rig and figuring what my end goal would be and what kind of build i want to do i finally decided to go with a supercharger. but ill also be running a wastegate on my system. ill be doing my motor build in a year and didnt wanna have to buy another headunit so in talking with a certian someone we have decided to go with the prochargewr F1a blower and ill be running the tial wastegate on it along with the biggest pully i can get from procharger. im pretty excited to see how this setup runs and from what ive been reading and told its gonna be pretty bad ass.. ill be paying off my balance i have the end of this week so i should have the kit in about..... i dont 3 week i guess. in the meantime ill be putting the other parts together as the kit i buitl with skip is a tuner kit so ill be getting together my injectors,fuel setup,sprk plugs and a few other goodies..

my absolute end result i am looking to achive will be about 1000hp to the wheels and i know its gonna take allot to reach but this is what i want.. i will be looking to run some gogo juice at some point also so if i pass the 1000 hp mark id be fine with that. ill be posting in my "minibuild" thread once the install starts and ill put all updates and dyno numbers as well as times in that thread.. LETS GET REDAY TO RUMBLE!!!!!

2010 silver Jeep SRT8 W/ opts 1 and 2 W/ performance audio and nav

72mm FOGLIGHT TWIN TURBO
nyjoed is offline  
Sponsored Links
Advertisement
 
post #2 of 403 (permalink) Old 01-20-2013, 09:42 PM
ALL MOTOR ;)
 
2ltrgsr's Avatar
 
Join Date: Jan 2010
Location: Newport news
Posts: 92
Thanks: 14
Thanked 7 Times in 7 Posts
i didn't know you could run a wastegate on a supercharger.... I'm a turbo guy so please enlighten me...
2ltrgsr is offline  
post #3 of 403 (permalink) Old 01-20-2013, 09:43 PM
RIP Chuck G.
 
junior666's Avatar
 
Join Date: Aug 2008
Location: Seaford,Queens NY
Posts: 6,340
Thanks: 808
Thanked 968 Times in 652 Posts
Congrats Joe!! Who is going to be installing everything?
junior666 is offline  
post #4 of 403 (permalink) Old 01-20-2013, 09:45 PM
PWR - Boosted & Stroked
 
J&D's SRT's's Avatar
 
Join Date: Apr 2010
Posts: 8,565
Thanks: 2,043
Thanked 1,548 Times in 1,212 Posts
Congrats Joe, can't wait to see & hear this when its done. Wonder what the sound will be like with the wastegate instead of a regular blowoff valve.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
J&D's SRT's is offline  
post #5 of 403 (permalink) Old 01-20-2013, 09:59 PM Thread Starter
Lifetime Premium Member
 
nyjoed's Avatar
 
Join Date: Nov 2009
Location: Westchester, N.Y.
Posts: 5,201
Thanks: 418
Thanked 388 Times in 278 Posts
Send a message via Yahoo to nyjoed
blown and wastegated

Thanks fellas!! Chris Jim will be doing it all. I mended things up with him about a month or so ago from some things I said a about 2 years ago being as I didn't realize what us east coat guys have on our side with Jim and the hemishop. I'm very glad he accepted my apology and couldn't ask for anyone better to help me out! Ill be running the "big red"
Valve and an mvr tial wastegate! Should sound like a G6 lol

Also Chris if cool you will be doing my cage when the time comes.

Sent from my iPhone using AutoGuide.com App
nyjoed is offline  
The Following User Says Thank You to nyjoed For This Useful Post:
junior666 (01-20-2013)
post #6 of 403 (permalink) Old 01-20-2013, 10:07 PM
Major Contributing Member
 
tmm403's Avatar
 
Join Date: Jun 2007
Location: New Jersey
Posts: 1,605
Thanks: 160
Thanked 107 Times in 104 Posts
That's awesome Joe. Can't wait to see it at the track.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
JEEP SOLD....TODD..2006 JEEP SRT8 -- 4" Bwoody CAI, Borla S w/resonator delete, Stant 18lb rad cap , Lips Harness, Nitto Motivos 275/315, BT Catch Can, Diablo Predator, R1 Eline drilled and slotted front and rear rotors, Hawk ceramic pads
tmm403 is offline  
post #7 of 403 (permalink) Old 01-20-2013, 10:59 PM Thread Starter
Lifetime Premium Member
 
nyjoed's Avatar
 
Join Date: Nov 2009
Location: Westchester, N.Y.
Posts: 5,201
Thanks: 418
Thanked 388 Times in 278 Posts
Send a message via Yahoo to nyjoed
thanks brother. my plan is to have her up and running for darlington. fingers crossed. should be pretty bad ass. and even better once i do my forged motor. ill be doing a built tranny at the end of this season
nyjoed is offline  
post #8 of 403 (permalink) Old 01-20-2013, 11:43 PM Thread Starter
Lifetime Premium Member
 
nyjoed's Avatar
 
Join Date: Nov 2009
Location: Westchester, N.Y.
Posts: 5,201
Thanks: 418
Thanked 388 Times in 278 Posts
Send a message via Yahoo to nyjoed
blown and wastegated

Quote:
Originally Posted by 2ltrgsr View Post
i didn't know you could run a wastegate on a supercharger.... I'm a turbo guy so please enlighten me...
It's the same concept as on a turbo except instead of exhaust pressure it's getting rid of the charge pressure. Works pretty much the same way. In my application for the time being ill be on the stock block. The f1a can be pullied down to its min boost output wich is about 12 psi HOWEVER the stock block with a Supercharger can maybe handle Bout 10-11 or so lbs and stock tranny even less. Ill be running about 5lbs on the street and about 7 at the track so all u have to do is the math. The blower is putting out say 12lbs and I wanna run 7 lbs. 12 minus 7 is 5 so I would run the correct spring that will blow of the extra boost. And eventually ill add a boost controller as well. If I didn't explain it the right way I'm sure skip or another expert can chime in but that's pretty much the gist of it. Being the f1a's boost is more aggressive then say the d1 I should get allot more boost off the line and quicker then then a d1 headunit. The powerband should be super sick with a nice flat like after I hit peak boost. All will equal a nasty SC setup!! Agin if I'm explaining this wrong skip can chime in and fix this up lol.


Sent from my iPhone using AutoGuide.com App
nyjoed is offline  
post #9 of 403 (permalink) Old 01-21-2013, 07:03 AM
Super Moderator
 
Muellge's Avatar
 
Join Date: Apr 2007
Location: NOLA
Posts: 3,751
Thanks: 426
Thanked 318 Times in 204 Posts
I think 1000 hp to the wheels from an f1a is ambitious unless your spraying it with a 175 shot or buzzing it in the 20s psi wise.


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.


Five Door League...

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

Last edited by Muellge; 01-21-2013 at 07:05 AM.
Muellge is offline  
post #10 of 403 (permalink) Old 01-21-2013, 08:04 AM
Supporting Vendor
 
DemonPerformance's Avatar
 
Join Date: Dec 2011
Location: Coastal Carolina
Posts: 5,551
Thanks: 1,477
Thanked 1,835 Times in 1,105 Posts
Quote:
Originally Posted by Muellge View Post
I think 1000 hp to the wheels from an f1a is ambitious unless your spraying it with a 175 shot or buzzing it in the 20s psi wise.
At about 15psi (which is about the max on the 6rib setup without seeing crazy slippage) you'd make it to the 900whp range on race gas tune with the 6 rib setup but we'll have an 8 rib conversion for these kits soon so they'll be able turn it up for the guys looking to make higher boost levels and power. Only a matter of time before it's available now.

Skip Demon Performance

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

1-888-312-3666
I wonder if they have Outback Steakhouses in the Outback?


To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.

To view links or images in signatures your post count must be 10 or greater. You currently have 0 posts.
DemonPerformance is offline  
Sponsored Links
Advertisement
 
Reply

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the Cherokee SRT8 Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Similar Threads
Thread Thread Starter Forum Replies Last Post
I need to eat my shoes now - I'm blown away Mango WK2 SRT8 General Discussion 16 03-04-2012 02:04 PM
May be blown, but it's still a Jeep wink Pics & Video Showoff Section 25 07-19-2011 01:44 AM
Anyone blown a '09 or '10? wink WK1 General Performance Discussion 15 06-05-2010 08:07 PM
Harrison vs Blown-WJ Power Ported Performance WK1 General Performance Discussion 54 06-12-2009 01:58 PM

Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome