Is this cam good for a stock head jeep? I think this is the one I want to go with. Trying to decide.
I actually traded my wife's Jeep in on the Super Bee before I ever installed it. I did have a set of Eagle heads that were going to be going on with it, only reason I say that is because IIRC 6.1 heads have a larger piston to valve clearance than the Eagle heads & this was about the largest cam I could use with the Eagle heads & stock short block. Based on what I remember this would be a good cam for 6.1 (stock heads) but you would most likely need to do springs, as you should with any cam swap.
PM Ekaz &/or Andy on here & they can confirm all the specs. You may be able to go with a bigger cam on the 6.1 heads.